5492GPIB B&K Precision, 5492GPIB Datasheet - Page 18
![no-image](/images/manufacturer_photos/0/0/90/b_k_precision_sml.jpg)
5492GPIB
Manufacturer Part Number
5492GPIB
Description
DMM BENCH 5 1/2DGT WITH GPIB CRD
Manufacturer
B&K Precision
Type
Digital (DMM)r
Specifications of 5492GPIB
Includes
Test Leads
Style
Bench
Display Digits
5.5
Display Type
VFD, Dual
Display Count
120000
Function
Voltage, Current, Resistance, Frequency
Functions, Extra
Continuity, dB, Diode Test
Features
Hold, Min/Max, RS-232 Port
Ranging
Auto/Manual
Response
True RMS
Accuracy
+/- 0.012 %
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
3-3 Primary and Secondary Displays
The meter has a 5 1/2 digit, Vacuum-Fluorescent dual display. This display
shows measurement readings, annunciator, and messages. The annunciator
indicates measurement units and the meter’s operating configuration.
The dual display allows you to see two properties (e.g. Vac and frequency) of the
input signal you are measuring. The display contains two major parts, primary
display and secondary display (See figure 3-1).
The primary display contains of larger digits and annunciators and is located on
the left side of the dual display. Readings using the relative (REL), minimum
maximum (MIN MAX), touch hold (HOLD), or decibels (dBm) modifier can be
shown on the primary display only.
The secondary display contains of a set of smaller digits on the right side of the
dual display. To press
secondary display on and press
secondary display off.
If the secondary display has been turned on and selected a measurement function
for the secondary display, the reading on the primary display will not be affected.
Neither function modifiers REL, dBm, HOLD, nor MINMAX can be selected
in the secondary display.
If user select
shown on the secondary display; continuity is restricted to the primary
display only.
for the primary display, only a diode test voltage will be
then followed by a function button to turn the
NOTE
18
then followed by
to turn the