NT31C-ST143-EV3 Omron, NT31C-ST143-EV3 Datasheet - Page 204

• Manufacturer Part Number: NT31C-ST143-EV3
• Description: 5.7 8-Color Dsp,STN,Ivory,Eng
• Manufacturer: Omron

Specifications of NT31C-ST143-EV3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6-9-13 Setting the Retry Count
System Settings
Reference:
The NT31/NT31C does not immediately display an error screen when a com-
munications error occurs, but tries to re-establish communications. The Retry
Counts setting specifies the number of attempts to be made to re-establish
communications. If communications cannot be recovered within this number
of attempts, the following happens depending on the setting made for the
Comm. Auto-return memory switch (page 184).
The setting range is 0 to 255 times. The default (factory) setting is 5 times.
For details on communications errors, refer to 7-2-5 Communications Errors
and Their Remedies (page 239).
• To confirm the settings and quit the memory switch setting screen, press
• To quit the memory switch setting screen without confirming the settings,
• Comm. Auto-return ON:
• Comm. Auto-return OFF:
the Quit touch switch. The settings made last will be set and the NT31/
NT31C will return to the MAINTENANCE MODE MENU screen.
press the Abort touch switch. The NT31/NT31C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
Operation in the RUN mode is continued without displaying an error
screen. Regardless of the setting made for Retry Counts, attempts to
re-establish communications are repeated until normal communica-
tions is achieved.
The RUN mode is ended and an error screen is displayed. On pressing
the OK touch switch on the error screen, the screen displayed imme-
diately before is redisplayed and attempts are made to re-establish
communications.
The System Menu can be displayed from the error screen by pressing
any two of the four corners of the touch panel simultaneously.
Section 6-9
187