NT31C-ST143-EV3 Omron, NT31C-ST143-EV3 Datasheet - Page 292

• Manufacturer Part Number: NT31C-ST143-EV3
• Description: 5.7 8-Color Dsp,STN,Ivory,Eng
• Manufacturer: Omron

Specifications of NT31C-ST143-EV3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Here, relationship between system program and hardware is described.
System programs indicated below are installed for the models shown above in the default state. Also, system
programs are supplied with the Support Tool as follows.
Note NT System Installer version 2.0 or higher is required to install the NT31/31C-V3 system program. (NT
These system programs are mutually compatible, therefore, they can be installed and used for the NT31-
ST121@-E, NT31C-ST141@-E, NT31-ST121@-EV1, NT31C-ST141@-EV1, NT31-ST121@-EV2, NT31-
ST122@-EV2, NT31C-ST141@-EV2, and NT31C-ST142@-EV2.
However, there will restrictions in some functions depending on the combination. Refer to the following table.
System program version 4.0@ can be used only with the NT31-ST123@-EV3 or NT31C-ST143@-EV3. This
system program cannot be installed on pre-version-2 hardware. System programs earlier than version 3.1@
cannot be installed in the NT31-ST123@-EV3 or NT31C-ST143@-EV3.
The following table shows only the relationship between the hardware and system program.
For details of the relationship with the screen data created using the Support Tool, refer to NT-series Support
Tool for Windows (Ver. 4. @ ) Operation Manual (V061-E1-@).
Limitations of System Program/PT Combinations
The following table shows only the relationship between the hardware and system program.
For details of the relationship with the screen data created using the Support Tool, refer to NT-series Support
Tool for Windows (Ver. 4. @ ) Operation Manual (V061-E1-@).
NT31-ST121@-E
NT31C-ST131@
NT31-ST121@-EV1
NT31C-ST141@-EV1
NT31-ST121@-EV2
NT31C-ST141@-EV2
NT31-ST122@-EV2
NT31C-ST142@-EV2
NT31-ST123@-EV3
NT31C-ST143@-EV3
System Installer version 2.0 is provided with NT-series Support Tool version 4.08 or higher.)
Model
Relationship between System Program and
Conventional product
above products
(December 1998)
above products
(December 1999)
above products
(October 2004)
above products
(September 2006)
Version upgrade of the
Version upgrade of the
Version upgrade of the
Version upgrade of the
History
Appendix I
Hardware
System Program version 1.@
(supplied with the
NT-ZJCMX1-EV2)
System Program version
2.0@ or 2.1@
(supplied with the
NT-ZJCMX1-EV3)
System Program version
3.0@ or 3.1@
(supplied with the
NT-ZJCMX1-V4.00)
System Program version 3.1
(supplied with the
NT-ZJCMX1-V4.05)
System Program version
4.0@
(supplied with the
NT-ZJCMX1-V4.08)
System program
Same for pre-version-1 and
version-2 hardware, but
there are restrictions to
some functions depending
on the version of the hard-
ware that is installed.
Only for hardware for ver-
sion-3 (EV3) PTs. Cannot be
installed with pre-version-1
or version-2 hardware.
275