DCN4-BR4D Omron, DCN4-BR4D Datasheet - Page 82

• Manufacturer Part Number: DCN4-BR4D
• Description: Thin Cable-Flat Cable Conv Con
• Manufacturer: Omron

Specifications of DCN4-BR4D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2-3-9
Cables, Connectors, and Related Devices
Communications Power Supply
In a DeviceNet system, a 24-V DC communications power supply must be
supplied to the Network. The communications power supply must meet the
specifications listed in the following table and the AC inputs and DC outputs
must be isolated.
The OMRON S82J-series and S82K-series Power Supply Units are recom-
mended. Select a Power Supply Unit with a current capacity that can comfort-
ably handle the total power consumption of all connected nodes and allow for
future expansion if necessary.
Communications Power Supply Specifications
The communications power supply must meet the following specifications.
DRS3-1
DCN4-TM4
DCN4-TP4D
Output voltage
Output current
Input fluctuation
Load fluctuation
Temperature effect
Input voltage
Input frequency
Output ripple
Output capacitance
Ambient temperature
Max. instantaneous output
current
Overvoltage protection
Overcurrent protection
Startup time
Startup overshoot
Insulation
Standards
Model
Item
Shielded Mini-size Connector with Terminating Resistance
(male plug)
Used to connect the DCN4-TR4-1.
Flat Cable Power Supply Terminal Block with Terminating
Resistance
When flat cable is used, communications power can be sup-
plied from the terminals on this terminal block.
24 V DC ±1%
16 A max.
0.3% max.
0.3% max.
0.03%/°C max.
100 to 1,200 V
47 to 450 Hz
250 mVp-p
7,000 µF max.
Operating: 0 to 60°C
Storage:
65 A max. (peak)
Must be provided.
Must be provided. (max. current: 125%)
Must reach 5% of final output voltage within 250 ms.
0.2% max.
Between output and AC power and between output
and chassis ground
Required: UL
Recommended: FCC Class B, CSA, TÜV, and VDE
−40 to 85°C
Remarks
Specifications
Section 2-3
61