DCN4-BR4D Omron, DCN4-BR4D Datasheet - Page 84

• Manufacturer Part Number: DCN4-BR4D
• Description: Thin Cable-Flat Cable Conv Con
• Manufacturer: Omron

Specifications of DCN4-BR4D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Wiring Methods
Straight Connector with Attachment Screws
Blue (CAN L)
Shield
Black (V − )
Note We recommend using the following crimp terminals and crimping tools.
Wiring
direction
4. Attach the crimp terminals (solderless pin terminals) to the lines and use
5. Cover the end of the cable with electrical tape or heat-shrink tubing as
6. Check that the connector is oriented correctly and the wire set screws are
Using thin
cables
Using thick
cables
• PHOENIX CONTACT, AI-series Crimp Terminals
Attachment
screw
the proper Crimping Tool to crimp the terminal securely.
shown in the following diagram.
loose enough to insert the wires. Insert the power lines, signal lines, and
shield wire in the correct holes in the following order (top to bottom): black,
blue, shield, white, and red.
Red (V+)
Cable type
• Straight Connectors
• Right-angle Connectors
With straight connectors, the wiring direction and connector insertion
direction are the same. Use the straight connectors if there is sufficient
wiring space.
With right-angle connectors, the wiring direction and connector inser-
White (CAN H)
Signal lines AI0.25-6YE
Power lines AI0.5-6WH
Signal lines A1-6
Power lines AI 2.5-8BU
Insertion
direction
Electrical tape or
heat-shrink tubing
Straight Connector without Attachment Screws
XW4B-05C1-
XW4B-05C1-
MSTB2.5/5-
ST-5.08AU
Blue (CAN L)
V1R-D
H1-D
Shield
Black (V − )
Crimp terminal
XW4B-05C4-
XW4B-05C4-
AI0.25-8YE
AI0.5-10WH
A1-10
AI 2.5-10BU
TF-D
T-D
Wiring
direction
Red (V+)
AI0.25-8YE
AI0.5-10WH
A1-10
AI 2.5-10BU
05C1-H1-D
05C4-TF-D
XW4G-
XW4G-
White (CAN H)
Insertion
direction
Section 2-4
CRIMPFOX
ZA3
Crimping
Tool
63