P0059 Terasic Technologies Inc, P0059 Datasheet - Page 49

• Manufacturer Part Number: P0059
• Description: DE2-115 EVAL BOARD
• Manufacturer: Terasic Technologies Inc
• Series: Cyclone® IVr
• Type: FPGAr

Specifications of P0059

• Contents: Board, Cables, CD, DVD, Power Adapter, Remote Controller
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: EP4CE115

Note : Users who want to use daughter card on GPIO connector need to pay close attention
to the I/O standard between DE2-115 GPIO connector pins and daughter card system. For
example, if the I/O standard of GPIO pins on DE2-115 board is set to 1.8V, a daughter card with
3.3V I/O standard may not work properly on the DE2-115 board due to I/O standard mismatch.
Figure 4-18
depicts the pin definition on the expansion connector for using these I/Os as LVDS
transmitters. Due to the reason that the column I/Os of the FPGA the expansion pins connecting
with can only support emulated LVDS transmitters, two single-ended output buffers and external
resistors must be used as shown in
Figure
4-19. The associated I/O standard of these differential
FPGA I/O pins on Quartus II project should set to LVDS_E_3R.
Figure 4-18 Pin defined when using LVDS interface on GPIO FPGA pins
The factory default setting on Rs resistor will be 47 ohm and Rp resistor will not be assembled for
single-ended I/O standard application. For LVDS transmitter application, please assemble 120 and
170 ohm resistor on Rs and Rp position, respectively.
Finally,
Table 4-12
shows all the pin assignments of the GPIO connector.
48