SI3200-G-GS Silicon Laboratories Inc, SI3200-G-GS Datasheet - Page 84

• Manufacturer Part Number: SI3200-G-GS
• Description: SLIC 2-CH 63dB 45mA 3.3V 6-Pin SMD
• Manufacturer: Silicon Laboratories Inc
• Series: ProSLIC®r

Specifications of SI3200-G-GS

• Package: 6SMD
• Number Of Channels Per Chip: 2
• Polarity Reversal: Yes
• Longitudinal Balanced: 63 dB
• Loop Current: 45 mA
• Minimum Operating Supply Voltage: 3.13 V
• Typical Operating Supply Voltage: 3.3 V
• Typical Supply Current: 0.11 mA
• Function: Subscriber Line Interface Concept (SLIC), CODEC
• Interface: GCI, PCM, SPI
• Number Of Circuits: 2
• Voltage - Supply: 3.3V, 5V
• Current - Supply: 110µA
• Power (watts): 941mW
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 16-SOIC (3.9mm Width)
• Includes: Battery Switching, BORSCHT Functions, DTMF Generation and Decoding, FSK Tone Generation, Modem and Fax Tone Detection
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Si3232
RINGCON: Ringing Configuration (Register Address 23)
(Register type: Initialization)
Reset settings = 0x00
84
Name ENSYNC RDACEN RINGUNB
Type
Bit
Bit
7
6
5
4
3
2
1
0
UNBPOLR
RINGUNB
RDACEN
ENSYNC
RINGEN
Name
TAEN
TRAP
D7
TIEN
R
D6
R
Ringing Waveform Present Flag.
0 = No ringing waveform present.
1 = Ringing waveform present.
Ringing Waveform Sent to Differential DAC.
0 = Ringing waveform not sent to differential DAC.
1 = Ringing waveform set to differential DAC.
Unbalanced Ringing Enable.
Enables internal unbalanced ringing generation.
0 = Unbalanced ringing not enabled.
1 = Unbalanced ringing enabled.
Ringing Active Timer Enable.
0 = Ringing active timer disabled.
1 = Ringing active timer enabled.
Ringing Inactive Timer Enable.
0 = Ringing inactive timer disabled.
1 = Ringing inactive timer enabled.
Ringing Oscillator Enable Monitor.
This bit will toggle when the ringing oscillator is enabled and disabled.
0 = Ringing oscillator is disabled.
1 = Ringing oscillator is enabled.
Reverse Polarity Unbalanced Ringing Select. The RINGOF RAM location must be
modified from its normal ringing polarity setting. Refer to “4.7. Internal Unbalanced
Ringing” for details.
0 = Normal polarity ringing.
1 = Reverse polarity ringing.
Ringing Waveform Selection.
0 = Sinusoid waveform.
1 = Trapezoid waveform.
R/W
D5
Preliminary Rev. 0.96
TAEN
R/W
D4
TIEN
R/W
D3
Function
RINGEN
D2
R
UNBPOLR
R/W
D1
TRAP
R/W
D0