1893BKILF IDT, Integrated Device Technology Inc, 1893BKILF Datasheet - Page 89

• Manufacturer Part Number: 1893BKILF
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of 1893BKILF

• Lead Free Status / RoHS Status: Compliant

7.14.6 Twisted Pair Tri-State Enable, TPTRI (bit 19.7)
7.14.7 ICS Reserved (bits 19.6:1)
7.14.8 Automatic 100Base-TX Power-Down (bit 19.0)
ICS1893BF, Rev. E, 8/11/09
Table 7-22. AMDIX_EN (Pin 10) and Control Bits 19. 9:8
The ICS1893BF provides a Twisted Pair Tri-State Enable bit. This bit forces the TP_TXP and TP_TXN
signals to a high-impedance state. When this bit is set to logic:
•
•
See
The Automatic 100Base-TX Power Down bit provides an STA with the means of enabling the ICS1893BF
to automatically shut down 100Base-TX support functions when 10Base-T operations are being used.
When this bit is set to logic:
•
•
Note:
Default Values:
Definitions:
Zero, the Twisted Pair Interface is operational.
One, the Twisted Pair Interface is tri-stated.
Zero, the 100Base-TX Transceiver does not power down automatically in 100Base-TX mode.
One, and the ICS1893BF is operating in 10Base-T mode, the 100Base-TX Transceiver automatically
turns off to reduce the overall power consumption of the ICS1893BF.
Section 7.11.2, “ICS Reserved (bits
ICS1893BF Data Sheet Rev. E - Release
straight transmit = TP_AP & TP_AN
cross
AMDIX_EN (Pin 10)AMDIX enable pin with 50 kOhm pull-up resistor
AMDIX_EN [19:9]
MDI_MODE [19:8] MDIO register 13h bit 8
AMDIX_EN
(Pin 10)
There are other means of powering down the 100Base-TX Transceiver (for example, when the
entire device is isolated using bit 0:10).
1
1
receive = TP_BP & TP_BN
transmit = TP_BP & TP_BN
receive = TP_AP & TP_AN
MDIO register 13h bit 9
AMDIX_EN
[Reg 19:9]
1
1
16.14:11)”, the text for which also applies here.
Copyright © 2009, IDT, Inc.
All rights reserved.
89
MDI_MODE
[Reg 19:8]
0
x
Chapter 7 Management Register Set
straight / cross (auto
selected)
straight / cross (auto
selected)
Configuration
Tx/Rx MDI
August, 2009