MC34910G5ACR2 Freescale, MC34910G5ACR2 Datasheet - Page 75
![](/photos/31/26/312678/296-32-tqfp_sml.jpg)
MC34910G5ACR2
Manufacturer Part Number
MC34910G5ACR2
Description
Manufacturer
Freescale
Datasheet
1.MC34910G5ACR2.pdf
(90 pages)
Specifications of MC34910G5ACR2
Turn Off Delay Time
10us
Number Of Drivers
2
Operating Temperature (min)
-40C
Lead Free Status / RoHS Status
Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
MC34910G5ACR2
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
LIN PHYSICAL LAYER
communication in automotive applications. The LIN physical
layer is designed to meet the LIN physical layer specification
and has the following features:
Slew Rate Selection
10.4 and 20 kBit/s as well as a fast baud rate for test and
programming. The slew rate can be adapted with the bits
LSR1:0 in the LIN control register (LINCR). The initial slew
rate is optimized for 20 kBit/s.
75
33910
FUNCTIONAL DEVICE OPERATIONS
OPERATIONAL MODES
The LIN bus pin provides a physical layer for single-wire
• LIN physical layer 2.0 compliant
• Slew rate selection
• Over-current shutdown
• Over-temperature shutdown
• LIN pull-up disable in Stop and Sleep modes
• Advanced diagnostics
• LIN dominant voltage level selection
The slew rate can be selected for optimized operation at
RXSHORT
RXONLY
MOD1:2
TXDOM
LSR0:1
RXD
LINOC
TXD
LINPE
LINOT
LDVS
Over-temperature Shutdown (interrupt maskable)
Over-current Shutdown (interrupt maskable)
High-voltage
Shutdown
WAKE-UP
Slope and Slew Rate Control
FILTER
Figure 39. LIN Interface
LIN – DRIVER
INTERRUPT
CONTROL
MODULE
High Side
Interrupt
SLOPE
CONTROL
and thermal shutdown. An internal pull-up resistor with a
serial diode structure is integrated, so no external pull-up
components are required for the application in a Slave mode.
The fall time from dominant to recessive and the rise time
from recessive to dominant is controlled. The symmetry
between both slopes is guaranteed.
LIN Pin
external disturbance, guaranteeing communication.
LIN Pull-up Disable In Stop and Sleep Mode
LIN bus short to ground or LIN bus leakage during Low Power
mode the internal pull-up resistor on the LIN pin can be
disconnected by clearing the LINPE bit in the MCR. The bit
LINPE also changes the bus wake-up threshold (
the current consumption in Stop and Sleep modes.
RECEIVER
The LIN driver is a low side MOSFET with over-current
The LIN pin offers a high susceptibility immunity level from
To improve performance and for safe behavior in case of
In case of a LIN bus short to GND, this feature will reduce
LIN
Wake-up
WAKE-UP
MODULE
Analog Integrated Circuit Device Data
LGND
VS1
30K
Freescale Semiconductor
LIN
V
BUSWU
).