MD2211-D16-V3 SanDisk, MD2211-D16-V3 Datasheet - Page 7

• Manufacturer Part Number: MD2211-D16-V3
• Manufacturer: SanDisk
• Type: Flash Diskr

Specifications of MD2211-D16-V3

• Density: 16MByte
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Package Type: TSOP-I
• Mounting: Surface Mount
• Pin Count: 48
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 3.6V
• Lead Free Status / RoHS Status: Supplier Unconfirmed

3.1
Table 2: Pin List Description
Pin Name
A[12:0]
D[7:0]
CE#
OE#
WE#
RSTIN#
ID[1:0]
BUSY#
VCC
GND
RESERVED Reserved – must be left floating.
NC / D[15:8]
3.2
DiskOnChip 2000 TSOP 16MB is pin compatible with DiskOnChip Millennium Plus 32MB. Both devices
are packed in a 48-pin TSOP-I package and the pin location is designed for an easy drop in replacement.
Some of the reserved pins of the DiskOnChip 2000 TSOP 16MB are utilized in the DiskOnChip Millennium
Plus 32MB. Please refer to the DiskOnChip Millennium Plus 32MB data sheet for a detailed description of
the additional functionality of the DiskOnChip Millennium Plus (e.g., 16-bit interface, security and data
protection features).
91-SR-002-32-8L Rev. 0.2
Pins Description
Compatibility with 32MB DiskOnChip Millennium Plus
Address bus
Data bus
Chip Enable, active low
Output Enable, active low
Write Enable, active low
Reset input, active low
Configuration control inputs to support multiple chips cascaded in the same memory
window.
First chip
Second chip - ID1, ID0 = GND, VCC (0,1)
Third chip
Forth chip
BUSY - Open drain; active low output indicates that the DiskOnChip is initializing and
should not be accessed. A pull-up resistor is required eve n if the pin is not used.
Device supply - All VCC pins must be connected.
Ground - All GND pins must be connected.
Not Connected - Current DiskOnChip 2000 TSOP 16MB is an 8-bit device
therefore these pins are not connected internally.
Data bus high byte – It is recommended that these pins be connected to D[15:8]
of the data bus for compatibility with DiskOnChips supporting the 16-bit bus
interface (e.g., DiskOnChip Millennium Plus 32MB).
- ID1, ID0 = GND, GND (0,0); used for single-chip configurations
- ID1, ID0 = VCC, GND (1,0)
- ID1, ID0 = VCC, VCC (1,1)
PRELIMINARY
Description
DiskOnChip 2000 TSOP 16MB Data Sheet
INPUT/OUTPUT
OPEN DRAIN
Direction
OUTPUT
SUPPLY
SUPPLY
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
7