CYIL2SM1300AA-GWCES Cypress Semiconductor Corp, CYIL2SM1300AA-GWCES Datasheet - Page 42

• Manufacturer Part Number: CYIL2SM1300AA-GWCES
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOSr

Specifications of CYIL2SM1300AA-GWCES

• Sensor Image Color Type: Monochrome
• Sensor Image Size Range: >= 480,000Pixels
• Sensor Image Size: 1280x1024Pixels
• Operating Supply Voltage (typ): 2.5V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Through Hole
• Lead Free Status / RoHS Status: Not Compliant

Glass Lid
The LUPA 1300-2 monochrome and color image sensor uses a glass lid without any coatings.
characteristics of the glass lid.
As seen in
are used.
Handling Precautions
For proper handling and storage conditions, refer to the Cypress
application note
Limited Warranty
Cypress Image Sensor Business Unit warrants that the image
sensor products to be delivered hereunder if properly used and
serviced, will conform to Seller's published specifications and will
be free from defects in material and workmanship for one (1)
year following the date of shipment. If a defect were to manifest
itself within 1 (one) year period from the sale date, Cypress will
either replace the product or give credit for the product.
Return Material Authorization (RMA)
Cypress packages all of its image sensor products in a clean
room environment under strict handling procedures and ships all
image sensor products in ESD-safe, clean room-approved
shipping containers. Products returned to Cypress for failure
analysis should be handled under these same conditions and
packed in its original packing materials, or the customer may be
liable for the product.
Document Number: 001-24599 Rev. *E
Figure
AN52561
37, no infrared attenuating color filter glass is used. You must provide this filter in the optical path when color devices
at www.cypress.com.
Figure 37. Transmission Characteristics of the Glass lid
Application Note References
■
■
■
■
AN54468: Interfacing the LUPA1300-2 with FPGA.
AN54214: High Speed Layout Guidelines for the LUPA 1300-2
Image Sensor
AN54598: Pixel Remapping Implementation in LUPA1300-2
Demonstration Kit
AN57864: Frame Rate Based on Integration Time
This application note describes the interface between the
LUPA 1300-2 and the FPGA, as implemented in the LUPA
1300-2 demonstration kit CYIL2SM1300-EVAL. It also pro-
vides an overview of the architecture of the demonstration kit
and the method used to synchronize channels.
This application note explains the remapping technique im-
plemented in LUPA1300-2 demonstration system to align non
consecutive pixels readout to consecutive pixels for creating
proper images. It also describes the remapping method dur-
ing Reverse-X/Y readout and subsampling modes of opera-
tion.
Figure 37
CYIL2SM1300AA
shows the transmission
Page 42 of 43
[+] Feedback