MB86297EB01 Fujitsu, MB86297EB01 Datasheet - Page 5

• Manufacturer Part Number: MB86297EB01
• Description: BOARD, EVAL, PCI, CARMINE, MB86297
• Manufacturer: Fujitsu

Specifications of MB86297EB01

• Silicon Manufacturer: Fujitsu
• Silicon Core Number: MB86297
• Kit Contents: Board
• Features: 128Mbyte DDR SDRAM Memory, Video Outputs, Video Input
• Application Sub Type: PCI Graphics Display Controller
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

MB86297EB01 Evaluation Board Manual
1 Overview
This PCI evaluation board is designed to evaluate and test the functionality of the Fujitsu MB86297
“Carmine” Graphic Display Controller (GDC).
The evaluation board can be used in any 5V or 3.3V PCI system (PCI V2.1 compliant) at 33 MHz /
66 MHz bus frequency. The example software and drivers included in this system were developed
for the Windows NT
2 Hardware Installation
In order to install the MB86297-EB01 evaluation board in your system, follow these instructions:
1. Make sure all jumpers are set to their default positions (refer to “Jumper Settings”).
2. Power down your target system (PC or other PCI environment) and insert the card. Note that
3. Restart your target system
4. Install the software driver and example software (refer to the software installation
5. Connect at least one DVI or VGA monitor to the output connector(s) to see the examples
either 3.3V or 5V systems can be used. Level-converters allow the operation of the evaluation
board in a 5V environment, but the Carmine GDC itself only has a 3.3V PCI interface.
instructions on the CD ROM)
provided
TM
, Windows 2000
© 2005 Fujitsu Microelectronics Europe
TM
and Windows XP
Revision 1.2
TM
P
operating systems.
Page 5 of 15