AD9258BCPZ-125 Analog Devices Inc, AD9258BCPZ-125 Datasheet - Page 40

• Manufacturer Part Number: AD9258BCPZ-125
• Description: IC ADC 14BIT 125MSPS DL 64LFCSP
• Manufacturer: Analog Devices Inc

Specifications of AD9258BCPZ-125

• Data Interface: Serial
• Design Resources: High Performance, Dual Channel IF Sampling Receiver (CN0140)
• Number Of Bits: 14
• Sampling Rate (per Second): 125M
• Number Of Converters: 2
• Power Dissipation (max): 788mW
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LFCSP
• Resolution (bits): 14bit
• Sampling Rate: 125MSPS
• Input Channel Type: Differential
• Supply Voltage Range - Analog: 1.7V To 1.9V
• Supply Voltage Range - Digital: 1.7V To 1.9V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AD9258
MEMORY MAP REGISTER DESCRIPTIONS
For additional information about functions controlled in
Register 0x00 to Register 0xFF, see the AN-877 Application
Note, Interfacing to High Speed ADCs via SPI.
Sync Control (Register 0x100)
Bits[7:3]—Reserved
Bit 2—Clock Divider Next Sync Only
If the master sync enable bit (Address 0x100, Bit0) and the clock
divider sync enable bit (Address 0x100, Bit 1) are high, Bit 2 allows
the clock divider to sync to the first sync pulse it receives and to
Rev. A | Page 40 of 44
ignore the rest. The clock divider sync enable bit (Address 0x100,
Bit 1) resets after it syncs.
Bit 1—Clock Divider Sync Enable
Bit 1 gates the sync pulse to the clock divider. The sync signal is
enabled when Bit 1 is high and Bit 0 is high. This is continuous
sync mode.
Bit 0—Master Sync Enable
Bit 0 must be high to enable any of the sync functions. If the
sync capability is not used this bit should remain low to
conserve power.