1586026-5 TE Connectivity, 1586026-5 Datasheet - Page 2

• Manufacturer Part Number: 1586026-5
• Description: RECEPTACLE HOUSING, 5WAY
• Manufacturer: TE Connectivity
• Series: VAL-U-LOKr

Specifications of 1586026-5

• Pitch Spacing: 4.2mm
• No. Of Contacts: 5
• No. Of Rows: 1
• Connector Mounting: Free
• Gender: Receptacle
• Contact Material: Brass
• Contact Plating: Tin
• Colour: Clear
• Rohs Compliant: Yes
• Product Type: Connector
• Connector Type: Housing
• Termination Method To Wire/cable: Crimp
• Sealed: No
• Ul File Number: E28476
• Csa File Number: 208567
• Mating Retention Type: Latching
• Contact Current Rating, Max (a): 9
• Operating Voltage Reference: AC
• Operating Voltage (vac): 600
• Profile Height (y-axis) (mm [in]): 7.50 [0.295]
• Number Of Positions: 5
• Number Of Rows: 1
• Centerline (mm [in]): 4.20 [0.165]
• Mating Retention: With
• Selectively Loaded: No
• Length (x-axis) (mm [in]): 22.20 [0.874]
• Width (z-axis) (mm [in]): 19.80 [0.779]
• Contact Type: Socket
• Contact Design: Dual Beam
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Color: Natural
• Ul Flammability Rating: UL 94V-2
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Circuit Identification Feature: With
• Operating Temperature (°c [°f]): -40 – +105 [-40 – +221]
• Applies To: Wire/Cable
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Pick And Place Cover: Without
• Packaging Method: Bag

2. REFERENCE MATERIAL
2.1. Revision Summary
2.2. Customer Assistance
Reference Part Number 794954 and Product Code K924 are representative numbers of VAL--U--LOK Series
Headers and Connectors. Use of these numbers will identify the product line and expedite your inquiries
through a service network established to help you obtain product and tooling information. Such information can
be obtained through a local TE Representative or, after purchase, by calling the Tooling Assistance Center or
the Product Information Center number at the bottom of page 1.
2.3. Drawings
Customer Drawings for specific products are available from the service network. The information contained in
Customer Drawings takes priority if there is a conflict with this specification or with any technical
documentation supplied by TE.
2.4. Manuals
Manual 402--40 is available upon request and can be used as a guide in soldering. This manual provides
information on various flux types and characteristics along with the commercial designation and flux removal
procedures. A checklist is included in the manual as a guide for information on soldering problems.
2.5. Specifications
Design Objective 108--2112 provides expected product performance requirements and test information.
2.6. Instructional Material
The following list includes available instruction sheets (408--series) that provide assembly procedures for
product, operation, maintenance and repair of tooling, as well as setup and operation procedures of
applicators; and customer manuals (409--series) that provides setup, operation, and maintenance of machines.
Document Number
3. REQUIREMENTS
3.1. Storage
2 of 14
S
S
408--3295
408--8040
408--8053
408--8917
408--8918
408--9816
409--5128
409--5842
409--5878
A. Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the header
assemblies or housings.
B. Shelf Life
The header assemblies and housings should remain in the shipping containers until ready for use to
prevent damage. These products should be used on a first in, first out basis to avoid storage
contamination.
C. Reeled Contacts
When using reeled contacts, store coil wound reels horizontally and traverse wound reels vertically.
Updated document to corporate requirements
New logo
Preparing Reel of Contacts for Applicator Tooling
Heavy Duty Miniature Quick--Change Applicators (Side--Feed Type)
Conversion Guide for Miniature Quick Change Applicators
PRO--CRIMPER* III Hand Tool Assembly 91387--1 with Die Assembly 91387--2
PRO--CRIMPER III Hand Tool Assembly 91388--1 with Die Assembly 91388--2
Handling of Reeled Products
Basic AMP--O--LECTRIC* Model “K” Terminating Machine
AMP--O--LECTRIC Model “G” Terminating Machine 354500--[ ]
AMPOMATOR* CLS IV+ Lead--Making Machine 356500--[ ]
Document Title
114- 13172
Rev K