20-101-1051 Rabbit Semiconductor, 20-101-1051 Datasheet - Page 47

• Manufacturer Part Number: 20-101-1051
• Description: MODULE RABBITCORE RCM3365
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1051

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 3000
• Flash: 512 KBytes
• Operating Supply Voltage: 3.15 to 3.45 V
• Board Size: 69 mm x 47 mm x 22 mm
• For Use With/related Products: RCM3365
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1111

5.1 More About Dynamic C
Dynamic C has been in use worldwide since 1989. It is specially designed for program-
ming embedded systems, and features quick compile and interactive debugging. A com-
plete reference guide to Dynamic C is contained in the Dynamic C User’s Manual.
You have a choice of doing your software development in the flash memory or in the static
SRAM included on the RCM3365/RCM3375. The flash memory and SRAM options are
selected with the
The advantage of working in RAM is to save wear on the flash memory, which is limited
to about 100,000 write cycles. The disadvantage is that the code and data might not both
fit in RAM.
Developing software with Dynamic C is simple. Users can write, compile, and test C and
assembly code without leaving the Dynamic C development environment. Debugging
occurs while the application runs on the target. Alternatively, users can compile a program
to an image file for later loading. Dynamic C runs on PCs under Windows 2000/NT and
later—see Rabbit’s Technical Note TN257, Running Dynamic C
User’s Manual
Dynamic C is an integrated development system for writing
embedded software. It runs on an IBM-compatible PC and is
designed for use with Rabbit controllers and other controllers
based on the Rabbit microprocessor. Chapter 5 describes the
libraries and function calls related to the RCM3365/RCM3375.
NOTE: An application should be run from the program execution SRAM after the serial
NOTE: Do not depend on the flash memory sector size or type in your program logic.
programming cable is disconnected. Your final code must always be stored in flash
memory for reliable operation. RCM3365/RCM3375 modules running at 44.2 MHz
have a fast program execution SRAM that is not battery-backed. Select
BIOS in Flash, Run in RAM
Compiler
SRAM at run-time to take advantage of the faster clock speed. This option optimizes
the performance of RCM3365/RCM3375 modules running at 44.2 MHz.
The RCM3365/RCM3375 and Dynamic C were designed to accommodate flash
devices with various sector sizes in response to the volatility of the flash-memory
market.
Options > Program Options > Compiler
menu to store the code in flash and copy it to the fast program execution
5. S
from the Dynamic C
OFTWARE
Options > Project Options >
menu.
®
R
With Windows Vista
EFERENCE
Code and
®
,
41