20-101-1051 Rabbit Semiconductor, 20-101-1051 Datasheet - Page 70
![MODULE RABBITCORE RCM3365](/photos/6/74/67489/20-101-1051_sml.jpg)
20-101-1051
Manufacturer Part Number
20-101-1051
Description
MODULE RABBITCORE RCM3365
Manufacturer
Rabbit Semiconductor
Datasheet
1.20-101-1051.pdf
(164 pages)
Specifications of 20-101-1051
Module/board Type
MPU Core Module
Product
Microcontroller Modules
Core Processor
Rabbit 3000
Flash
512 KBytes
Operating Supply Voltage
3.15 to 3.45 V
Board Size
69 mm x 47 mm x 22 mm
For Use With/related Products
RCM3365
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
316-1111
- Current page: 70 of 164
- Download datasheet (3Mb)
6.5 Run the PINGME.C Sample Program
Connect the crossover cable from your computer’s Ethernet port to the RCM3365/
RCM3375 board’s RJ-45 Ethernet connector. Open this sample program from the
SAMPLES\TCPIP\ICMP
The crossover cable is connected from your computer’s Ethernet adapter to the RCM3365/
RCM3375 board’s RJ-45 Ethernet connector. When the program starts running, the green
LINK
nection is made. (Note: If the
cable, or if you are using a hub with straight-through cables perhaps the power is off on
the hub.)
The next step is to ping the board from your PC. This can be done by bringing up the MS-
DOS window and running the pingme program:
or by
and typing the entry
Notice that the yellow
ping is taking place, and indicates the transfer of data. The ping routine will ping the board
four times and write a summary message on the screen describing the operation.
6.6 Running Additional Sample Programs With Direct Connect
The following sample programs are in the Dynamic C
folder.
•
•
64
BROWSELED.C
Two “device LEDs” are created along with two buttons to toggle them. Users can use
their Web browser to change the status of the lights. The DS3 and DS4 LEDs on the
Prototyping Board will match those on the Web page. As long as you have not modified
the
your Web browser to bring up the Web page served by the sample program.
Otherwise use the TCP/IP settings you entered in the
MBOXDEMO.C
in to the Prototyping Board when using this sample program. This program demon-
strates sending e-mail messages that are then shown on the LCD/keypad module dis-
play. The keypad is used to scroll through a menu to view the messages, flip to other
messages, mark messages as read, and delete messages. When a new e-mail arrives, an
LED on the LCD/keypad module turns on, and then turns off once the message has
been marked as read. A log of all e-mail actions is kept, and can be displayed in the
Web browser. All current e-mails can also be read with the Web browser.
http://10.10.6.100.
Start > Run
light on the RCM3365/RCM3375 module should be on to indicate an Ethernet con-
ping 10.10.6.101
ping 10.10.6.101
TCPCONFIG 1
—The optional LCD/keypad module (see Appendix C) must be plugged
—This program demonstrates a basic controller running a Web page.
macro in the sample program, enter the following server address in
ACT
folder, compile the program, and start it running under Dynamic C.
light flashes on the RCM3365/RCM3375 module while the
LNK
light does not light, you may not be using a crossover
SAMPLES\RCM3360\TCPIP\
TCP_CONFIG.LIB
RabbitCore RCM3365/RCM3375
library.
Related parts for 20-101-1051
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![20-101-0575](/photos/6/75/67539/20-101-0575_tmb.jpg)
Part Number:
Description:
COMPUTER SGL-BRD BL2500 29.4MHZ
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0576](/photos/37/60/376010/bl2500_600_tmb.jpg)
Part Number:
Description:
COMPUTER SGL-BRD BL2500 29.4MHZ
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0412](/photos/37/60/376043/101-0412_tmb.jpg)
Part Number:
Description:
DISPLAY GRAPHIC 12KEY PROG OP670
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0411](/photos/37/60/376043/101-0412_tmb.jpg)
Part Number:
Description:
DISPLAY GRAPHIC 12KEY ETH OP6700
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0457](/photos/37/60/376012/bl20_600_tmb.jpg)
Part Number:
Description:
COMPUTER SINGLE-BOARD BL2030
Manufacturer:
Rabbit Semiconductor
![20-101-0455](/photos/37/60/376012/bl20_600_tmb.jpg)
Part Number:
Description:
COMPUTER SGL-BOARD ETH BL2010
Manufacturer:
Rabbit Semiconductor
![20-101-0497](/photos/37/60/376011/op6800_rgb_tmb.jpg)
Part Number:
Description:
MODULE OP6810 W/O ETH/MEM EXPANS
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0456](/photos/37/60/376012/bl20_600_tmb.jpg)
Part Number:
Description:
COMPUTER SINGLE-BOARD BL2020
Manufacturer:
Rabbit Semiconductor
![20-101-0591](/photos/37/60/376012/bl20_600_tmb.jpg)
Part Number:
Description:
COMPUTER BL2010 W/FRICTION LOCK
Manufacturer:
Rabbit Semiconductor
![20-101-0594](/photos/37/60/376012/bl20_600_tmb.jpg)
Part Number:
Description:
COMPUTER BL2020 W/FRICTION LOCK
Manufacturer:
Rabbit Semiconductor
![20-101-0602](/photos/37/60/376010/bl2500_600_tmb.jpg)
Part Number:
Description:
COMPUTER SGL-BRD BL2500 44.2MHZ
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0430](/photos/37/60/376012/bl20_600_tmb.jpg)
Part Number:
Description:
COMPUTER SGL-BOARD FULL BL2000
Manufacturer:
Rabbit Semiconductor
![20-101-0462](/photos/37/60/376013/bl2100_600_tmb.jpg)
Part Number:
Description:
COMPUTER SINGLE-BOARD BL2110
Manufacturer:
Rabbit Semiconductor
![20-101-0891](/photos/37/60/376014/bl2600_600_tmb.jpg)
Part Number:
Description:
COMPUTER SGL-BRD 29.4MHZ BL2610
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0654](/photos/37/60/376011/op6800_rgb_tmb.jpg)
Part Number:
Description:
INTERFACE OP6800 512K FLASH&SRAM
Manufacturer:
Rabbit Semiconductor
Datasheet: