20-101-1051 Rabbit Semiconductor, 20-101-1051 Datasheet - Page 51

• Manufacturer Part Number: 20-101-1051
• Description: MODULE RABBITCORE RCM3365
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1051

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 3000
• Flash: 512 KBytes
• Operating Supply Voltage: 3.15 to 3.45 V
• Board Size: 69 mm x 47 mm x 22 mm
• For Use With/related Products: RCM3365
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1111

5.2.3 Serial Communication Drivers
Library files included with Dynamic C provide a full range of serial communications sup-
port. The
PACKET.LIB
by the 9th bit, by transmission gaps, or with user-defined special characters. Both libraries
provide blocking functions, which do not return until they are finished transmitting or
receiving, and nonblocking functions, which must be called repeatedly until they are fin-
ished, allowing other functions to be performed between calls. For more information, see
the Dynamic C Function Reference Manual and Technical Note TN213, Rabbit Serial
Port Software.
5.2.4 TCP/IP Drivers
The TCP/IP drivers are located in the
libraries and the TCP/IP functions is provided in the Dynamic C TCP/IP User’s Manual.
5.2.5 NAND Flash Drivers
The Dynamic C
memory devices on the RCM3365 and the RCM3375. The function calls were written spe-
cifically to work with industry-standard flash devices with a 528-byte page program and
16896-byte block erase size. The NAND flash function calls are designed to be closely
cross-compatible with the newer serial flash function calls found in the
library. These function calls use an
flash device. This allows multiple NAND flash devices to be used by an application.
More information on these function calls is available in the Dynamic C Function Refer-
ence Manual.
The NAND flash and the xD-Picture Card are ideally suited to store files with a directory
structure. The Dynamic C FAT file system module provides support for a file system and
for formatting the xD-Picture Card for use in a Rabbit-based system. Visit our Web site at
www.rabbit.com
further information on the Dynamic C FAT File System and other Dynamic C modules.
The supporting documentation for the Dynamic C FAT File System and the sample
programs in the
file system.
User’s Manual
RS232.LIB
library provides packet-based serial functions where packets can be delimited
NANDFlash\NFLASH.LIB
SAMPLES\FileSystem\
or contact your Rabbit sales representative or authorized distributor for
library provides a set of circular-buffer-based serial functions. The
nf_device
LIB\TCPIP
folder illustrate the use of the Dynamic C FAT
library is used to interface to NAND flash
structure as a handle for a specific NAND
folder. Complete information on these
SFLASH.LIB
45