20-101-1067 Rabbit Semiconductor, 20-101-1067 Datasheet - Page 88

• Manufacturer Part Number: 20-101-1067
• Description: MODULE RABBITCORE RCM3305
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1067

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Flash: 512 KBytes
• Timers: 10 bit
• Operating Supply Voltage: 3.15 to 3.45 V
• Board Size: 47 mm x 69 mm x 22 mm
• For Use With/related Products: RCM3305
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1113

•
•
•
•
•
•
•
•
82
Module Extension Headers
module is duplicated at headers J8 and J9. Developers can solder wires directly into the
appropriate holes, or, for more flexible development, 2 × 17 header strips with a 0.1"
pitch can be soldered into place. See Figure B-4 for the header pinouts.
Digital I/O
Figure B-4 for the header pinouts.
RS-232
Prototyping Board at screw-terminal header J14.
RS-485
nal header J14.
Quadrature Decoder
3000 chip are available on screw-terminal header J5. See Figure B-4 for the header
pinouts.
H-Bridge Motor Driver
screw-terminal headers J3 and J4 on the Prototyping Board for stepper-motor control.
See Figure B-4 for the header pinouts.
RabbitNet Port
available to allow RabbitNet peripheral cards to be used with the Prototyping Board.
Serial Flash Interface
available to allow Rabbit’s SF1000 series serial flash to be used on the Prototyping
Board.
—Two 3-wire serial ports or one 5-wire RS-232 serial port are available on the
—One RS-485 serial port is available on the Prototyping Board at screw-termi-
—Four digital inputs are available on screw-terminal header J6. See
—One RS-422 RabbitNet port (shared with the serial flash interface) is
—Four quadrature decoder inputs (PF0–PF3) from the Rabbit
—One serial flash interface (shared with the RabbitNet port) is
—Two pairs of H-bridge motor drivers are supported using
—The complete pin set of the RCM3305/RCM3315
RabbitCore RCM3305/RCM3315