EZ80190AZ050SG Zilog, EZ80190AZ050SG Datasheet - Page 56

• Manufacturer Part Number: EZ80190AZ050SG
• Description: IC WEBSERVER 8 BIT 50MHZ 100LQFP
• Manufacturer: Zilog

Specifications of EZ80190AZ050SG

• Processor Type: eZ80
• Features: High Speed, Single-Cycle Instruction-Fetch
• Speed: 50MHz
• Voltage: 3.3V
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Processor Series: EZ80190x
• Core: eZ80
• Data Bus Width: 8 bit
• Program Memory Type: ROMLess
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI, UART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 6
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-3866; EZ80190AZ050SG

GPIO Interrupts
PS006614-1208
System
DATA
Clock
Bus
Register (Output)
Level-Triggered Interrupts
GPIO Data
D
Q
Each port pin can be used as an interrupt source. Interrupts can be either level- or edge-
triggered.
When the port is configured for level-triggered interrupts, the corresponding port pin is
tristated. An interrupt request is generated when the level at the pin is the same as the level
stored in the Port x Data register. The port pin value is sampled by the system clock. The
input pin must be held at the selected interrupt level for a minimum of 2 clock periods to
initiate an interrupt. The interrupt request remains active as long as this condition is main-
tained at the external source.
For example, if PA3 is programmed for low-level interrupt and the pin is forced Low for 2
clock cycles, an interrupt request signal is generated from that port pin and sent to the
CPU. The interrupt request signal remains active until the external device driving PA3
Mode 1
Mode 4
Mode 1
Mode 3
System
Clock
Register (Input)
Figure 7. GPIO Port Pin Block Diagram
GPIO Data
Q
D
Q
D
GND
VDD
General-Purpose Input/Output
Product Specification
Port
Pin
eZ80190
46