MPC8313VRADDB Freescale Semiconductor, MPC8313VRADDB Datasheet - Page 2

• Manufacturer Part Number: MPC8313VRADDB
• Description: MPU POWERQUICC II PRO 516-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC8313VRADDB

• Processor Type: MPC83xx PowerQUICC II Pro 32-Bit
• Speed: 267MHz
• Voltage: 0.95 V ~ 1.05 V
• Mounting Type: Surface Mount
• Package / Case: 516-PBGA
• Processor Series: MPC8xxx
• Core: e300
• Data Bus Width: 32 bit
• Development Tools By Supplier: MPC8313E-RDB
• Maximum Clock Frequency: 400 MHz
• Operating Supply Voltage: - 0.3 V to + 1.26 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Data Ram Size: 16 KB
• I/o Voltage: 2.5 V
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• Program Memory Type: EEPROM/Flash
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Overview
1
The MPC8313E incorporates the e300c3 core, which includes 16 Kbytes of L1 instruction and data caches
and on-chip memory management units (MMUs). The MPC8313E has interfaces to dual enhanced
three-speed 10/100/1000 Mbps Ethernet controllers, a DDR1/DDR2 SDRAM memory controller, an
enhanced local bus controller, a 32-bit PCI controller, a dedicated security engine, a USB 2.0 dual-role
controller and an on-chip full-speed PHY, a programmable interrupt controller, dual I
4-channel DMA controller, and a general-purpose I/O port. A block diagram of the MPC8313E is shown
in
The MPC8313E security engine (SEC 2.2) allows CPU-intensive cryptographic operations to be offloaded
from the main CPU core. The security-processing accelerator provides hardware acceleration for the DES,
3DES, AES, SHA-1, and MD-5 algorithms.
1.1
The following features are supported in the MPC8313E:
2
Figure
•
•
•
•
•
•
•
•
PCI
Overview
Embedded PowerPC™ e300 processor core built on Power Architecture™ technology; operates at
up to 333 MHz.
High-performance, low-power, and cost-effective host processor
DDR1/DDR2 memory controller—one 16-/32-bit interface at up to 333 MHz supporting both
DDR1 and DDR2
16-Kbyte instruction cache and 16-Kbyte data cache, a floating point unit, and two integer units
Peripheral interfaces such as 32-bit PCI interface with up to 66-MHz operation, 16-bit enhanced
local bus interface with up to 66-MHz operation, and USB 2.0 (full speed) with an on-chip PHY.
Security engine provides acceleration for control and data plane security protocols
Power management controller for low-power consumption
High degree of software compatibility with previous-generation PowerQUICC processor-based
designs for backward compatibility and easier software migration
1.
MPC8313E Features
Dual I
DUART
Timers
GPIO
DMA
2
C
I/O Sequencer
(IOS)
MPC8313E PowerQUICC
Note: The MPC8313 does not include a security engine.
Controller
Interrupt
Security Engine 2.2
Figure 1. MPC8313E Block Diagram
™
II Pro Processor Hardware Specifications, Rev. 3
I-Cache
e300c3 Core w/FPU and
16-KB
Power Management
Host/Device/OTG
ULPI
USB 2.0
D-Cache
16-KB
On-Chip
FS PHY
Gb Ethernet
MAC
Local Bus,
SPI
Freescale Semiconductor
2
C controllers, a
Gb Ethernet
DDR1/DDR2
MAC
Controller