IDT92HDW74E15PRGXB2X8 IDT, Integrated Device Technology Inc, IDT92HDW74E15PRGXB2X8 Datasheet - Page 24

• Manufacturer Part Number: IDT92HDW74E15PRGXB2X8
• Description: IC AUDIO CODEC HD 8CH 48-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Audio Codec, HDr

Specifications of IDT92HDW74E15PRGXB2X8

• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 5
• Sigma Delta: No
• S/n Ratio, Adcs / Dacs (db) Typ: 86 / 90
• Dynamic Range, Adcs / Dacs (db) Typ: 86 / 90
• Voltage - Supply, Analog: 3.14 V ~ 3.47 V; 3.8 V ~ 4.2 V; 4.28 V ~ 4.73 V; 4.75 V ~ 5.25 V
• Voltage - Supply, Digital: 3.14 V ~ 3.47 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 48-TQFP, 48-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 92HDW74E15PRGXB2X8

TEN CHANNEL HD AUDIO CODEC, PREMIUM WLP 3/4 COMPLIANT
Power State
92HDW74E
TEN CHANNEL HD AUDIO CODEC, PREMIUM WLP 3/4 COMPLIANT
Digital Mics
D1-D3
D0-D3
D0
0
1
2
3
4
DMIC Widget
either DMIC_0 or 1
Single Edge on the
one DMIC pin and
second DMIC pin.
Enabled
Double Edge on
Double Edge on
Single Edge on
DMIC_0 and 1
Data Sample
Double Edge
Yes
Yes
Single Edge
No
N/A
OR
Table 12. DMIC_CLK and DMIC_0,1 Operation During Power States
Clock Disabled
Clock Disabled
Clock Capable
DMIC_CLK
Output
ADC Conn.
0, or 1
0, or 1
0, or 1
0, or 1
N/A
Table 11. Valid Digital Mic Configurations
Input Disabled
Input Disabled
Input Capable
DMIC_0,1
sampling on a single Digital Mic pin channel on rising edge and second Digital Mic
right channel on falling edge of DMIC_CLK for those digital microphones that don’t
Requires both DMIC_0 or DMIC_1, External logic required to support sampling on
support alternative clock edge capability. If both DMIC_0 and DMIC_1 are used to
configuration is not recommended since it consumes two stereo ADC resources.
Connected to DMIC_0 and DMIC_1, External logic required to support sampling
support alternative clock edge capability. Two ADC units are required to support
support alternative clock edge capability. Two ADC units are required to support
support 2 digital microphones, 2 separate ADC units will be used, however, this
channel on falling edge of DMIC_CLK for those digital microphones that don’t
on a single Digital Mic pin channel on rising edge and second Digital Mic right
channel on falling edge of DMIC_CLK for those digital microphones that don’t
Both ADC Channels produce data, may be in phase or out by 1/2 DMIC_CLK
a single Digital Mic pin channel on rising edge and second Digital Mic right
Available on either DMIC_0 or DMIC_1, External logic required to support
period depending upon external configuration and timing
24
Input Widget is Enabled. Otherwise, the DMIC_CLK remains Low
DMIC_CLK Output is Enabled when either DMIC_0 or DMIC_1
Available on either DMIC_0 or DMIC_1
DMIC_CLK is HIGH-Z with Weak Pull-down
DMIC_CLK is HIGH-Z with Weak Pull-down
No Digital Microphones
this configuration
this configuration
Notes
92HDW74E
Notes
PC AUDIO
V 1.0 03/08