IDTSTAC9205X3NBEB2XR IDT, Integrated Device Technology Inc, IDTSTAC9205X3NBEB2XR Datasheet - Page 47

• Manufacturer Part Number: IDTSTAC9205X3NBEB2XR
• Description: IC AUDIO CODEC 4CH HD 3.3V 48QFN
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Audio Codec, HDr

Specifications of IDTSTAC9205X3NBEB2XR

• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 2
• Sigma Delta: No
• S/n Ratio, Adcs / Dacs (db) Typ: 98 / 103
• Dynamic Range, Adcs / Dacs (db) Typ: 98 / 95
• Voltage - Supply, Analog: 3.14 V ~ 3.47 V; 3.8 V ~ 4.2 V; 4.28 V ~ 4.73 V; 4.75 V ~ 5.25 V
• Voltage - Supply, Digital: 3.14 V ~ 3.47 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 48-QFN
• Single Supply Voltage (typ): 3.3V
• Single Supply Voltage (min): 3.135V
• Single Supply Voltage (max): 3.465V
• Package Type: VFQFPN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: STAC9205X3NBEB2XR

IDT™
4-CHANNEL HD AUDIO CODEC WITH QUAD DIGITAL MICROPHONE INTERFACE
STAC9204/9205
4-CHANNEL HD AUDIO CODEC WITH QUAD DIGITAL MICROPHONE INTERFACE
3.4.2.17. AFG GPIOSticky
[31:5]
Bit
Bit
[2]
[1]
[0]
[4]
Set1
Get
Bitfield Name
Bitfield Name
Mask4
Rsvd
En2
En1
En0
Table 53. AFG GPIOSticky Command Response Format
Table 51. AFG GPIOUnsol Command Response Format
Table 52. AFG GPIOSticky Command Verb Format
Verb ID
F1A
71A
RW
RW
RW
RW
RW
RW
47
R
See bits [7:0] of bitfield table.
Reset
Reset
0x0
0x0
0x0
0x0
0x0
Payload
00
Unsolicited enable mask for GPIO2. If set,
and the Unsolicited Response control for
this widget has been enabled, an unsolicited
response will be sent when GPIO0 is
configured as input and changes state.
Unsolicited enable mask for GPIO1. If set,
and the Unsolicited Response control for
this widget has been enabled, an unsolicited
response will be sent when GPIO0 is
configured as input and changes state.
Unsolicited enable mask for GPIO0. If set,
and the Unsolicited Response control for
this widget has been enabled, an unsolicited
response will be sent when GPIO0 is
configured as input and changes state.
Reserved
GPIO4 input type (when configured as
input):
0 = Non-Sticky (level-sensitive);
1 = Sticky (edge-sensitive).
Sticky inputs are cleared by writing zero to
corresponding bit of GPIO Data register.
GPIOPolarity determines rising or falling
edge sensitivity.
STAC9204/9205
Description
Description
See bitfield table.
0000_0000h
Response
PC AUDIO
V 1.0 12/06