DP83820BVUW National Semiconductor, DP83820BVUW Datasheet - Page 48
![no-image](/images/manufacturer_photos/0/4/469/national_semiconductor_sml.jpg)
DP83820BVUW
Manufacturer Part Number
DP83820BVUW
Description
IC INTERFACE CONTROLLER 208-PQFP
Manufacturer
National Semiconductor
Datasheet
1.DP83820BVUW.pdf
(87 pages)
Specifications of DP83820BVUW
Controller Type
Ethernet Controller, MAC/BIU
Interface
IEEE 802.3
Voltage - Supply
3.3V
Current - Supply
150mA
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
208-MQFP, 208-PQFP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
*DP83820BVUW
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DP83820BVUW
Manufacturer:
ACUTE
Quantity:
75
Company:
Part Number:
DP83820BVUW
Manufacturer:
Texas Instruments
Quantity:
10 000
4.0 Register Set
4.2.8 Interrupt Enable Register
The Interrupt Enable Register controls the hardware INTR signal.
4.2.9 Interrupt Holdoff Register
The Interrupt Holdoff Register prevents interrupt assertion for a programmed amount of time.
4.2.10 Transmit Descriptor Pointer Register
This register points to the current Transmit Descriptor. If Transmit Priority Queueing is enabled, this becomes the
Descriptor pointer for Priority Queue 0 (lowest priority).
31-3
31-1
31-9
2-0
bit
7-0
bit
bit
0
8
IHCTL
TXDP
tag
tag
IE
IH
tag
Offset: 0018h
Offset: 001Ch
Offset: 0020h
(Continued)
Interrupt Enable
Interrupt Holdoff
Control
Interrupt Holdoff
Tag: IER
Tag: IHR
Tag: TXDP
Transmit Descriptor Pointer
description
description
description
unused
When set to 1, the hardware INTR signal is enabled. When set to 0, the hardware INTR
signal will be masked, and no interrupts will be generated. The setting of this bit has no
effect on the ISR or IMR. This provides the ability to disable the hardware interrupt to
the host with a single access (eliminating the need for a read-modify-write cycle). The
actual enabling of interrupts can be delayed based on the Interrupt Holdoff Register
defined in the following section.
unused
If this bit is set, the interrupt holdoff will restart when the first interrupt condition occurs
and interrupts are enabled. When this bit is not set, the interrupt holdoff will start as
soon as the counter is loaded and interrupts are enabled.
This register contains a counter value for use in preventing interrupt assertion for a
programmed amount of time. When the ISR is read, the interrupt holdoff timer is loaded
with this value. It begins to count down to 0 based on the setting of the IHCTL bit. Once
it reaches 0, interrupts will be enabled. The counter value is in units of 100us.
Access: Read Write
Access: Read Write
Access: Read Write
The current value of the transmit descriptor pointer. When the transmit state
machine is idle, software must set TXDP to the address of a completed
transmit descriptor. While the transmit state machine is active, TXDP will
follow the state machine as it advances through a linked list of active
descriptors. If the link field of the current transmit descriptor is NULL
(signifying the end of the list), TXDP will not advance, but will remain on the
current descriptor. Any subsequent writes to the TXE bit of the CR register
will cause the transmit state machine to reread the link field of the current
descriptor to check for new descriptors that may have been appended to
the end of the list. Transmit descriptors must be aligned on an even 64-bit
boundary in host memory (A2-A0 must be 0).
unused
Size: 32 bits
Size: 32 bits
Size: 32 bits
48
usage
usage
usage
Hard Reset: 00000000h
Hard Reset: 00000000h
Hard Reset: 00000000h
Soft Reset: 00000000h
Soft Reset: 00000000h
Soft Reset: 00000000h
www.national.com