H5CX-L8-N AC100-240 Omron Automation, H5CX-L8-N AC100-240 Datasheet - Page 29

• Manufacturer Part Number: H5CX-L8-N AC100-240
• Description: Relay; E-Mech; Timing; Multi-Function; Cur-Rtg 5A; Ctrl-V 100-240AC; Socket Mnt; 8 Pin
• Manufacturer: Omron Automation
• Type: Timerr

Specifications of H5CX-L8-N AC100-240

• Brand/series: H5CX
• Connection Type: 8 Pin Socket
• Contact Form: 5 A at 250VAC/30 VDC
• Dimensions: 58H x 48W x 62.5D
• Display Type: 7 Segment LCD
• Function: Multifunction Digital Timer
• Input Type: Signal, Reset and Gate
• Ip Rating: IP66
• Mounting Type: Flush, Surface or Din Rail
• Number Of Inputs: 3
• Number Of Outputs: 1
• Output Type: SPDT
• Primary Type: Digital Timer
• Voltage, Supply: 100-240 VAC

Timing Charts
Operating Procedures for Timer Function
Models without Instantaneous Contact Outputs
The gate input is not included in the H5CX-L8@ models.
Mode toff: Flicker OFF start 1 (Timer resets when power comes ON.)
Basic operation
* Start signal input is disabled during timing.
Timing starts when the start signal goes ON.
The status of the control output is reversed when time is
up (OFF at start).
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
Note: Normal output operation will not be possible if
Mode ton: Flicker OFF start 1 (Timer resets when power comes ON.)
Basic operation
* Start signal input is disabled during timing.
Timing starts when the start signal goes ON.
The status of the control output is reversed when time is
up (ON at start).
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
Note: Normal output operation will not be possible if
Mode toff-1: Flicker OFF start 2 (Timer does not reset when power comes ON.)
Basic operation
* Start signal input is disabled during timing.
Timing starts when the start signal goes ON.
The status of the control output is reversed when time is
up (OFF at start).
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
Note: Normal output operation will not be possible if
Start signal
Start signal
Start signal
Output
Output
Power
Power
input
input
Output
the set time is too short.
Set the value to at least 100 ms (contact output
type).
the set time is too short.
Set the value to at least 100 ms (contact output
type).
Power
the set time is too short.
Set the value to at least 100 ms (contact output
type).
input
*
*
*
Timing
Timing
OFF
Timing
ON
OFF
Timing
Timing
Timing
ON
OFF
ON
Timing
OFF
Timing
Timing
OFF
ON
a
(a + b = ON time)
Timing
Timing
OFF
ON
b
Detailed operation
Detailed operation
Detailed operation
Control output
Control output
Control output
UP
DOWN
UP
DOWN
UP
DOWN
Start signal
Start signal
Start signal
OFF time
OFF time
OFF time
OFF time
OFF time
OFF time
ON time
ON time
ON time
ON time
ON time
ON time
Power
Power
Power
Reset
Reset
Reset
Gate
Gate
Gate
0
0
0
0
0
0
H5CX-A@-N/-L@-N
Twin Timer
29