H5CX-L8-N AC100-240 Omron Automation, H5CX-L8-N AC100-240 Datasheet - Page 39

• Manufacturer Part Number: H5CX-L8-N AC100-240
• Description: Relay; E-Mech; Timing; Multi-Function; Cur-Rtg 5A; Ctrl-V 100-240AC; Socket Mnt; 8 Pin
• Manufacturer: Omron Automation
• Type: Timerr

Specifications of H5CX-L8-N AC100-240

• Brand/series: H5CX
• Connection Type: 8 Pin Socket
• Contact Form: 5 A at 250VAC/30 VDC
• Dimensions: 58H x 48W x 62.5D
• Display Type: 7 Segment LCD
• Function: Multifunction Digital Timer
• Input Type: Signal, Reset and Gate
• Ip Rating: IP66
• Mounting Type: Flush, Surface or Din Rail
• Number Of Inputs: 3
• Number Of Outputs: 1
• Output Type: SPDT
• Primary Type: Digital Timer
• Voltage, Supply: 100-240 VAC

Explanation of Functions
Absolute value setting/forecast value setting
(setm)
Set value 1 can be set as the forecast value setting (
absolute value setting (
Forecast Value Setting
Self-diagnostic Function
The following displays will appear if an error occurs.
*1. This includes times when the life of the EEPROM has expired.
*2. The normal display and
• OUT1 (forecast output) turns ON when the present value reaches
• OUT2 (control output) turns ON when the present value reaches
• If the forecast set value ≥ set value, OUT1 (forecast output) will turn
the forecast value.
Forecast value = Set value - Forecast set value
Note: The forecast set value is used to set the deviation for the set value.
the set value.
ON as soon as timing starts.
set value
When the Reset Key is pressed,
continue without clearing the output ON count.)
Forecast
Main display
Forecast output
Control output
e1
e2
e2
e3
(OUT 2)
Forecast
(OUT1)
*2
value
value
Set
0
Example: F-1 Mode
abs
e3
Sub-display
No change
).
will appear alternately.
Not lit
Not lit
sum
e3
will no longer be displayed even if the alarm set value is exceeded. (Monitoring is possible, however, because the Timer will
Present
value
CPU
Memory error (RAM)
Memory error EEPROM
Output ON count alarm set
value exceeded
ofst
Error
) or the
*1
Output status
Absolute Value Setting
Refer to pages 18 and 28 for information on other functions.
No change
• OUT1 (control output 1) turns ON when the present value reaches
• OUT2 (control output 2) turns ON when the present value reaches
Control output 1
Control output 2
set value 1.
set value 2.
OFF
OFF
OFF
Set value 2
Set value 1
(OUT1)
(OUT2)
0
Example: F-1 Mode
Either press the Reset Key or
reset the power supply.
Reset Key.
Reset the power supply.
Reset Key
Correction method
Present
value
H5CX-B@-N
Set value after reset
Factory setting
No change
No change
No change
39