VQ1101N-51 SMC Corporation, VQ1101N-51 Datasheet - Page 80

• Manufacturer Part Number: VQ1101N-51
• Description: VALVE; SOLENOID; 6 MM; 15 W (MAX.); 24 VDC; 2 POSITION SINGLE; METAL; 0.5 MPA
• Manufacturer: SMC Corporation
• Type: Solenoidr

Specifications of VQ1101N-51

• Brand/series: VQ Series
• Configuration: 2-Position Single
• Enclosure Rating: IP65
• Fluid Type: Air/Inert Gas
• Pressure, Operating: 0.7 MPa
• Primary Type: Solenoid Valve
• Temperature, Ambient: –10° to +50°C
• Valve Type: 5-Port Solenoid, Plug-In, Base Mounted with 2 Position Actuation, Rubber Seal, Negative Common
• Voltage, Coil: 24 VDC

The lighting positions are concentrated on one side
for both single solenoid type and double solenoid
type. In the double solenoid type, A side and B side
energization are indicated by two colors which match
the colors of the manual overrides.
Back page 3
Surge absorption
diode
DC circuit diagram
Single solenoid
Note) A-side energization:
(Drawing shows a VQ1000 case.)
Light
Caution
A light (Orange) illuminates.
B-side energization:
B light (Green) illuminates.
Manual override:
Green
Manual override:
Orange
Light/Surge Voltage Suppressor
Stop diode
Series
Specific Product Precautions 1
Be sure to read before handling.
Refer to back pages 1 and 2 for Safety Instructions and Handling Precautions for SMC
Products (M-E03-3) for 3/4/5 Port Solenoid Valves Precautions.
With wrong wiring prevention (stop
diode) mechanism
With a surge absorption (surge
absorption diode) mechanism
Indicator light:
Orange
VQ1000/2000
Indicator light
A: Orange
B: Green
Double solenoid
Stop diode
Single solenoid
Double solenoid
Light
Surge absorption
diode
Without an electric signal for the solenoid valve the
manual override is used for switching the main valve.
Push type is standard. (Tool required) Locking type is
semi-standard. (Tool required/Manual)
VQ1000
VQ1000
VQ1000
Push type (Tool required)
Locking type (Tool required) <Semi-standard>
Locking type
Bore ø3.2
Warning
Bore ø3.2
Do not apply excessive torque when turning the locking type manual
override. (0.1 N·m or less)
Caution
(Manual)
Manual Override
VQ2000
VQ2000
VQ2000
<Semi-standard>
Bore ø4.2
Bore ø4.2
Push down on the manual
override with a small screw-
driver, etc. until it stops. Re-
lease the screwdriver and the
manual override will return.
Push down on the manual
override with a flat head
screwdriver until it stops.
Turn it clockwise by 90 to
lock it. Turn it counterclock-
wise to release it.
Push down on the manual
override with a small flat
head screwdriver or with your
fingers until it stops. Turn it
clockwise by 90 to lock it.
Turn it counterclockwise to
release it.