ICS1893BFILFT IDT, Integrated Device Technology Inc, ICS1893BFILFT Datasheet - Page 94

• Manufacturer Part Number: ICS1893BFILFT
• Description: PHYCEIVER LOW PWR 3.3V 48-SSOP
• Manufacturer: IDT, Integrated Device Technology Inc
• Series: PHYceiver™r
• Type: PHY Transceiverr

Specifications of ICS1893BFILFT

• Protocol: MII
• Voltage - Supply: 3.14 V ~ 3.47 V
• Mounting Type: Surface Mount
• Package / Case: 48-SSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Drivers/receivers: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 1893BFILFT

ICS1893BF, Rev. F, 5/13/10
Table 8-5. PHY Address and LED Pins
P2LI
P3TD
Name
Pin
ICS1893BF Data Sheet - Release
Number
Pin
4
6
Input or
Input or
Output
Output
Type
Pin
PHY (Address Bit) 2 / Link Integrity LED.
For more information on this pin, see
As an input pin:
As an output pin:
PHY (Address Bit) 3 / Transmit Data LED.
For more information on this pin, see
As an input pin:
As an output pin:
Caution:
Caution:
•
•
•
•
•
•
This multi-function configuration pin is:
– An input pin during either a power-on reset or a hardware reset. In
– An output pin following reset. In this case, this pin provides link status
This pins establishes the address for the ICS1893BF. When the signal
on this pin is logic:
– Low, that address bit is set to logic zero.
– High, that address bit is set to logic one.
When the signal on this pin is:
– De-asserted, this state indicates the ICS1893BF does not have a
– Asserted, this state indicates the ICS1893BF has a valid link.
These multi-function configuration pins are:
– Input pins during either a power-on reset or a hardware reset. In this
– Output pins following reset. In this case, this pin provides indication
This pin establishes the address for the ICS1893BF. When the signal
on one of these pins is logic:
– Low, that address bit is set to logic zero.
– High, that address bit is set to logic one.
When the signal on this pin is:
– De-asserted, this state indicates the ICS1893BF does not have
– Asserted, this state indicates the ICS1893BF has Transmit activity.
this case, this pin configures the address of the ICS1893BF PHY
Address Bit 2.
for the ICS1893BF.
link.
case, these pins configure the address of the ICS1893BF PHY
Address Bit 3.
of Transmit activity.
Transmit activity.
Copyright © 2009, IDT, Inc.
All rights reserved.
This pin must not float. (See the notes at
“Multi-Function (Multiplexed) Pins: PHY Address and LED
Pins”.)
This pin must not float. (See the notes at
“Multi-Function (Multiplexed) Pins: PHY Address and LED
Pins”.)
94
Chapter 8 Pin Diagram, Listings, and Descriptions
Pin Description
Section 5.5, “Status
Section 5.5, “Status
Section 8.2.2,
Section 8.2.2,
Interface”.
Interface”.
May, 2010