804-1210 XANTREX TECHNOLOGY, 804-1210 Datasheet - Page 12

• Manufacturer Part Number: 804-1210
• Description: BATTERY CHARGER, LEAD ACID, 265VAC
• Manufacturer: XANTREX TECHNOLOGY

Specifications of 804-1210

• Battery Charger Type: Switch Mode
• Battery Technologies Supported: Lead Acid
• Supply Voltage: 265VAC

Safety
PREPARING TO CHARGE
x
This guide for use by qualified installers only
4. If battery acid contacts skin or clothing, wash
5. Never smoke or allow a spark or flame near the engine or
6. Use extra caution to reduce the risk or dropping a metal
7. Remove all personal metal items, like rings, bracelets,
8. If you need to remove a battery, always remove the
9. Never charge a frozen battery.
10. Make sure the area around the battery is well ventilated.
11. Make sure the voltage of the batteries matches the output
12. Clean battery terminals. Be careful to keep corrosion
13. Study and follow all of the battery manufacturer's
immediately with soap and water. If acid enters your eye,
immediately flood it with running cold water for at least
twenty minutes and get medical attention immediately.
batteries.
tool on the battery. It could spark or short circuit the
battery or other electrical parts and could cause an
explosion.
and watches when working with batteries. Batteries can
produce a short circuit current high enough to weld a ring
or metal bracelet or the like to the battery terminal,
causing a severe burn.
negative terminal from the battery first for systems with
grounded negative. If it is grounded positive, remove the
positive terminal first. Make sure all loads connected to
the battery and all accessories are off so you don’t cause
an arc.
voltage of the battery charger.
from coming into contact with your eyes and skin.
specific precautions, such as removing or not removing
cell caps while charging, whether equalization is
acceptable for your battery, and recommended rates of
charge.
975-0402-01-01