804-1210 XANTREX TECHNOLOGY, 804-1210 Datasheet - Page 47

• Manufacturer Part Number: 804-1210
• Description: BATTERY CHARGER, LEAD ACID, 265VAC
• Manufacturer: XANTREX TECHNOLOGY

Specifications of 804-1210

• Battery Charger Type: Switch Mode
• Battery Technologies Supported: Lead Acid
• Supply Voltage: 265VAC

975-0402-01-01
AC wiring access hole
with strain relief
This guide for use by qualified installers only
10. When all connections are completed, push the wiring and
11. Place the strain relief on the AC wiring access hole.
12. Install the wiring compartment cover to fasten the strain
13. Proceed to “Mounting the Optional Remote Panel” on
14. Connect the AC supply wiring from the charger to the
15. Connect the line conductor to the breaker, the neutral to
16. Secure cables in place using tie-wraps or cable straps
connectors inside the AC wiring compartment.
relief and tighten the screw on top to secure the cover. Do
not over-tighten.
page 2–26, if you have the optional remote panel.
AC panel feeding the charger.
the neutral bus, and the ground to the ground bus.
according to electrical codes.
screw to secure the
wiring compartment
cover
Installing the Truecharge™ 2 Battery Charger
2–23