3F88L-CG001N Omron, 3F88L-CG001N Datasheet - Page 32
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
3F88L-CG001N
Manufacturer Part Number
3F88L-CG001N
Description
CABLE CAM OUTPUT-I/O BLOCK 1M
Manufacturer
Omron
Datasheet
1.3F88L-RL10.pdf
(232 pages)
Specifications of 3F88L-CG001N
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
3F88LCG001N
- Current page: 32 of 232
- Download datasheet (5Mb)
Design
H Conformance to EC Directives
The 3F88L-160/162 Cam Positioner complies with EC Directives. To ensure that the system in which
the 3F88L-160/162 is installed complies with EC Directives, the following precautions must be ob-
served.
• The 3F88L-160/162 is defined as an in-panel device according to the Low-voltage Directive. The
• Reinforced insulation or double insulation must be used for the DC power supplies used as I/O power
• The 3F88L-160/162 conforms to the Common Emission Standard (EN50081-2) in relation to EMI.
2-2-3 Mounting the Resolver
H Mounting Method
D 3F88L-RS17/17T (Flange-mounted)
3F88L-160/162 must, therefore, be installed within a control panel.
supplies.
However, the radiated emission (10-m regulations) may vary depending on the configuration of the
control panel, connected devices, wiring, and other conditions. The customer must, therefore, confirm
that devices and the overall machine conform to EC Directives.
• • • • Recommended
Four, M4-screws
mounting holes
Use the Resolver Coupling to connect the Resolver to the machinery. This Coupling pro-
tects the Resolver from vibrations and shocks from the machinery.
35
dia.
50 ± 0.3 dia.
+0.025
/
+0.009
• • • • Mounting example
3-mm sheet min.
Chapter 2
Four, M4
screws
50 dia.
2-9