BLKD815EPFVU Intel, BLKD815EPFVU Datasheet - Page 45

• Manufacturer Part Number: BLKD815EPFVU
• Manufacturer: Intel

Specifications of BLKD815EPFVU

• Lead Free Status / Rohs Status: Supplier Unconfirmed

1.13 Hardware Management Subsystem
1.13.1 Hardware Monitor Component
1.13.2 Chassis Intrusion Detect Connector (Optional)
The hardware management features enable the board to be compatible with the Wired for
Management (WfM) specification. The board has several hardware management features,
including the following:
•
•
•
The hardware monitor component provides low-cost instrumentation capabilities. The features of
the component include:
•
•
•
•
The board supports a chassis security feature that detects if the chassis cover is removed. For the
chassis intrusion circuit to function, the chassis’ power supply must be connected to AC power.
The security feature uses a mechanical switch on the chassis that attaches to the chassis intrusion
detect connector. The mechanical switch is closed for normal computer operation. Chassis
intrusion detection can be supported with third party SMBus software.
For information about
Obtaining the WfM specification
Fan control functions of the SMSC LPC47M132 and
optional SMSC LPC47M142 I/O controllers
For information about
The location of the optional chassis intrusion detect connector
The signal names of the optional chassis intrusion detect connector
Hardware monitoring
Chassis intrusion detect connector (optional)
Fan control and monitoring (implemented on both the SMSC LPC47M132 and optional SMSC
LPC47M142 I/O controllers)
Internal ambient temperature sensing
Remote thermal diode sensing for direct monitoring of processor temperature (if supported in
the processor)
Power supply monitoring (+12 V, +5 V, +3.3 V, +2.5 V, 3.3 VSB, and V
above or below acceptable values
SMBus interface
Refer to
Table 4, page 18
Section 1.13.2, page 45
Refer to
Figure 14, page 69
Table 37, page 72
CCP
Product Description
) to detect levels
45