ZPM3570-E RFM, ZPM3570-E Datasheet - Page 18

• Manufacturer Part Number: ZPM3570-E
• Description: TXRX ZIGBEE PRO MODULE
• Manufacturer: RFM
• Series: ZPMr

Specifications of ZPM3570-E

• Frequency: 2.4GHz ~ 2.5GHz
• Data Rate - Maximum: -
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 20dBm
• Sensitivity: -103dBm
• Voltage - Supply: 2.4 V ~ 3.4 V
• Current - Receiving: 35mA
• Current - Transmitting: 175mA
• Data Interface: Solder Pad
• Memory Size: 8Mbits
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 583-1162

Cet appareil est conforme avec Santé Canada Code de sécurité 6 / IC RSS-210. Le programme d'instal-
lation de cet appareil doit s'assurer que les rayonnements RF n'est pas émis au-delà de l'exigence de
Santé Canada. Les informations peuvent être obtenues: http://www.hc-sc.gc.ca/ewhsemt/
pubs/radiation/radio_guide-lignes_direct-eng.php
The host device should be properly labeled to identify the module within the host device. The Industry
Canada certification label of a module shall be clearly visible at all times when installed in the host device,
otherwise the host device must be labeled to display the Industry Canada certification number of the mod-
ule, preceded by the words “Contains transmitter module”, or the word “Contains”, or similar wording ex-
pressing the same meaning, as follows: Contains transmitter module IC:4523A-ZPM3750 where 4523A-
ZPM3750 is the module’s certification number.
11.3 CE Notice (Europe)
This device has been tested and certified for use in the European Union. If this device is used in a prod-
uct, the OEM has responsibility to verify compliance of the final product to the EU standards. A Declara-
tion of Conformity must be issued and kept on file as described in Annex II of the Radio and Telecommu-
nications Terminal Equipment Directive.
The ‘CE’ mark must be placed on the OEM product per the labeling requirements of the Directive. Given
that the operating frequency band is not harmonized by a few European countries, the restriction or alert
sign must be placed along side the ‘CE’ mark as shown below. As of the date of
this document, only France has a restriction. The restriction is that, if the radio is operated outdoors
in the 2450-2483.5 MHz band, the power must be limited to 10 mW instead of 100 mW. The OEM
must account for this and the product must have the alert mark. It does not require country
notifications, however.
12 Technical Support Contact
For technical support call RFM at [phone] between the hours of 8:30 AM and 5:30 PM US East-
ern Time, or E-mail [e-mail].
13 References
[1] IEEE Standard 802.15.4 - 2003 Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate
Wireless Personal Area Networks (LR-WPANs)
[2] Ember, “EmberZNet API Reference: For the EM35x SoC Platform”, 120-3022-000G, October 28 2010
Note: Specifications subject to change without notice.
Part # M-3570-0000, Rev A
www.RFM.com
Technical support +1.678.684.2000
Page 18 of 18
© 2011 by RF Monolithics, Inc.
E-mail:
[e-mail]
ZPM3570 Data Sheet - 05/25/11