166981-005 FCI, 166981-005 Datasheet - Page 11

• Manufacturer Part Number: 166981-005
• Manufacturer: FCI

Specifications of 166981-005

• Lead Free Status / Rohs Status: Not Compliant

TITLE
Specification of Requirements for Cable Preparation, Wire Termination and
Copyright FCI
Form E-3334
Rev E
9.1
Assembly of Connectors Using 72392-type Contacts
Termination Requirements, Visual
Requirements for an acceptable termination are shown in Figure 19 as well as non-destructive visual
inspection methods to insure satisfactory terminations without removing wires.
9.1.1 Wire Location
The copper conductor shall extend at least .75mm beyond the IDC dimples. This requirement
shall be considered met if the wire insulation extends at least 1.00mmj beyond the IDC dimples.
At a maximum the insulation may extend to surface ‘D’. See Figure 9
Figure 9 - Wire Insertion Visual Requirements
TYPE
APPLICATION SPECIFICATION
PDM: Rev:J
NUMBER
PAGE
AUTHORIZED BY
STATUS
STATUS:
J.R. Volstorf
11 of 29
UNRESTRICTED
Released
GS-20-002
REVISION
DATE
25-Apr-06
Printed: Nov 27, 2010
J
GS-01-001
.