166981-005 FCI, 166981-005 Datasheet - Page 7

• Manufacturer Part Number: 166981-005
• Manufacturer: FCI

Specifications of 166981-005

• Lead Free Status / Rohs Status: Not Compliant

5.0
6.0
TITLE
Specification of Requirements for Cable Preparation, Wire Termination and
Copyright FCI
Form E-3334
Rev E
Cable Preparation
See “ASSEMBLY OF COMPONENTS AFTER WIRE INSERTION” for restrictions on cable diameters of each
connector. See section “APPLICATION TOOLING” for available wire insertion equipment.
5.1
DESIGNING WIRING DIAGRAMS
The connector sub-assemblies are polarized with respect to the latch side of the connector. On wiring diagrams
this polarization feature must be specified so that when the wire insertion operation is performed, the operator
can properly orient the parts to the cable. In addition, on connectors using more than one connector sub-
assembly, the cable assembly drawing and wiring diagram must specify a scheme to identify which connector
sub-assembly will occupy which position in the connector assembly.
Assembly of Connectors Using 72392-type Contacts
72476, 72477 and 88940 type 4-row Metral™ Unshielded Connectors
The following recommendations are for cable assemblies where one or more cables are being terminated
to one connector and the user wished to tie the cable jacket to the connector cover for added strain relief.
In the cases where more than one connector is being attached to one cable follow the cable assembly
drawing instructions.
Figure 5 Wiring Diagram - 72476 Unshielded Connectors
Figure 4 Cable Preparation - Unshielded Connectors
TYPE
APPLICATION SPECIFICATION
PDM: Rev:J
NUMBER
PAGE
AUTHORIZED BY
STATUS
STATUS:
J.R. Volstorf
7 of 29
UNRESTRICTED
Released
GS-20-002
REVISION
DATE
25-Apr-06
Printed: Nov 27, 2010
J
GS-01-001
.