CS5396-KS Cirrus Logic Inc, CS5396-KS Datasheet - Page 35

no-image

CS5396-KS

Manufacturer Part Number
CS5396-KS
Description
ADC Dual Delta-Sigma 96KSPS 24-Bit Serial 28-Pin SOIC
Manufacturer
Cirrus Logic Inc
Datasheet

Specifications of CS5396-KS

Package
28SOIC
Resolution
24 Bit
Sampling Rate
96 KSPS
Architecture
Delta-Sigma
Number Of Analog Inputs
2
Digital Interface Type
Serial (SPI)
Input Type
Voltage
Sample And Hold
Yes
Polarity Of Input Voltage
Bipolar

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CS5396-KS
Manufacturer:
CRYSTAL
Quantity:
345
Part Number:
CS5396-KS
Manufacturer:
CS
Quantity:
20 000
Part Number:
CS5396-KSEP
Manufacturer:
CS
Quantity:
20 000
Part Number:
CS5396-KSZ
Manufacturer:
CIRRUS
Quantity:
20 000
PARAMETER DEFINITIONS
Dynamic Range
Total Harmonic Distortion + Noise
Frequency Response
Interchannel Isolation
Interchannel Gain Mismatch
Gain Error
Gain Drift
Offset Error
DS229PP2
The ratio of the rms value of the signal to the rms sum of all other spectral components over
the specified bandwidth. Dynamic Range is a signal-to-noise ratio measurement over the
specified bandwidth made with a -60 dBFS signal. 60 dB is added to resulting measurement to
refer the measurement to full-scale. This technique ensures that the distortion components are
below the noise level and do not affect the measurement. This measurement technique has been
accepted by the Audio Engineering Society, AES17-1991, and the Electronic Industries
Association of Japan, EIAJ CP-307. Expressed in decibels.
The ratio of the rms value of the signal to the rms sum of all other spectral components over
the specified band width (typically 10 Hz to 20 kHz), including distortion components.
Expressed in decibels. Measured at -1 and -20 dBFS as suggested in AES17-1991 Annex A.
A measure of the amplitude response variation from 10 Hz to 20 kHz relative to the amplitude
response at 1 kHz. Units in decibels.
A measure of crosstalk between the left and right channels. Measured for each channel at the
converter’s output with no signal to the input under test and a full-scale signal applied to the
other channel. Units in decibels.
The gain difference between left and right channels. Units in decibels.
The deviation from the nominal full-scale analog output for a full-scale digital input.
The change in gain value with temperature. Units in ppm/ C.
The deviation of the mid-scale transition (111...111 to 000...000) from the ideal. Units in mV.
CS5396 CS5397
35

Related parts for CS5396-KS