SC16C750BIA44,518 NXP Semiconductors, SC16C750BIA44,518 Datasheet - Page 9

• Manufacturer Part Number: SC16C750BIA44,518
• Description: IC UART SINGLE W/FIFO 44-PLCC
• Manufacturer: NXP Semiconductors
• Type: UART with 64-byte FIFOsr

Specifications of SC16C750BIA44,518

• Number Of Channels: 1, UART
• Package / Case: 44-LCC (J-Lead)
• Fifo's: 64 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Data Rate: 3 Mbps
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.25 V
• Supply Current: 4.5 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 2.5 V or 3.3 V or 5 V
• Transmit Fifo: 64Byte
• Receive Fifo: 64Byte
• Transmitter And Receiver Fifo Counter: Yes
• Package Type: PLCC
• Operating Supply Voltage (max): 5.5V
• Mounting: Surface Mount
• Pin Count: 44
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-2049-2; 935274402518; SC16C750BIA44-T

NXP Semiconductors
SC16C750B_5
Product data sheet
6.1 Internal registers
The rich feature set of the SC16C750B is available through internal registers. Automatic
hardware flow control, selectable transmit and receive FIFO trigger level, selectable TX
and RX baud rates, modem interface controls, and a sleep mode are some of these
features.
The SC16C750B provides 12 internal registers for monitoring and control. These registers
are shown in
standard 16C550. These registers function as data holding registers (THR/RHR), interrupt
status and control registers (IER/ISR), a FIFO Control Register (FCR), line status and
control registers (LCR/LSR), modem status and control registers (MCR/MSR),
programmable data rate (clock) control registers (DLL/DLM), and a user accessible
Scratchpad Register (SPR). Register functions are more fully described in the following
paragraphs.
Table 3.
[1]
[2]
A2
General register set (THR/RHR, IER/ISR, MCR/MSR, FCR, LSR, SPR)
0
0
0
0
1
1
1
1
Baud rate register set (DLL/DLM)
0
0
These registers are accessible only when LCR[7] is a logic 0.
These registers are accessible only when LCR[7] is a logic 1.
A1
0
0
1
1
0
0
1
1
0
0
Internal registers decoding
Table
A0
0
1
0
1
0
1
0
1
0
1
3. These twelve registers are similar to those already available in the
Rev. 05 — 17 October 2008
READ mode
Receive Holding Register
Interrupt Enable Register
Interrupt Status Register
Line Control Register
Modem Control Register
Line Status Register
Modem Status Register
Scratchpad Register
LSB of Divisor Latch
MSB of Divisor Latch
[2]
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
WRITE mode
Transmit Holding Register
Interrupt Enable Register
FIFO Control Register
Line Control Register
Modem Control Register
n/a
n/a
Scratchpad Register
LSB of Divisor Latch
MSB of Divisor Latch
SC16C750B
[1]
© NXP B.V. 2008. All rights reserved.
9 of 44