STA540 STMicroelectronics, STA540 Datasheet - Page 17

• Manufacturer Part Number: STA540
• Description: IC AMP AUD DUAL/QUAD MULTIWATT15
• Manufacturer: STMicroelectronics
• Type: Class ABr

Specifications of STA540

• Output Type: 2-Channel (Stereo) or 4-Channel (Quad)
• Max Output Power X Channels @ Load: 38W x 2 @ 4 Ohm; 16W x 4 @ 4 Ohm
• Voltage - Supply: 8 V ~ 22 V
• Features: Short-Circuit and Thermal Protection, Standby
• Mounting Type: Through Hole
• Package / Case: Multiwatt-15 (Vertical, Bent and Staggered Leads)
• Amplifier Class: AB
• No. Of Channels: 4
• Output Power: 24W
• Supply Voltage Range: 8V To 22V
• Thd + N: 0.02% @ 4W, 4ohm, VS=14.4V
• Load Impedance: 8ohm
• Operating Temperature Range: -40°C To +150°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8880-5

STA540
6.7
6.7.1
6.7.2
Built–in protection
Diagnostic facilities (pin 10)
The STA540 is equipped with diagnostic circuitry that is able to detect the following events:
"
"
"
The event is signalled when the open collector output of pin 10 begins to sink current.
Short-circuit protection
Reliable and safe operation in the presence of all kinds of output short circuit is assured by
the built-in protection. As well as the AC/DC short circuit to GND and to VS, and across the
speaker, there is a soft short-circuit condition, which is signalled on pin 10 (DIAGNOSTICD)
during the turn-on phase, to verify output circuit integrity in order to ensure correct amplifier
operation.
This particular kind of protection acts in such a way as to prevent the device being turned on
(via pin ST-BY) when a resistive path (that is a DC path) less than 16 Ω exists between the
output and GND. This would avoid loud speaker damage should, for example, the output
coupling capacitor develop an internal short circuit.
As mentioned previously, it is important to limit the external current driving pin ST-BY
to 5 mA. The reason is that the associated circuitry is normally disabled with currents
greater than 5 mA.
The soft short-circuit protection is particularly attractive when, in the single-ended
configuration, one capacitor is shared between two outputs (see
Figure 23. Shared capacitor in single-ended configuration
clipping of the output signal,
thermal shutdown,
output fault:
–
–
–
short circuit to GND,
short circuit to VS,
soft short circuit at turn-on.
Figure
Practical information
23).
17/23