SAM3N4C Atmel Corporation, SAM3N4C Datasheet - Page 191

• Manufacturer Part Number: SAM3N4C
• Manufacturer: Atmel Corporation

Specifications of SAM3N4C

• Flash (kbytes): 256 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 48 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 79
• Ext Interrupts: 79
• Quadrature Decoder Channels: 2
• Usb Speed: No
• Usb Interface: No
• Spi: 3
• Twi (i2c): 2
• Uart: 4
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 1
• Dac Resolution (bits): 10
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 24
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

10.22 System timer, SysTick
Table 10-33. System timer registers summary
1.
11011A–ATARM–04-Oct-10
Address
0xE000E010
0xE000E014
0xE000E018
0xE000E01C
SysTick calibration value.
Name
CTRL
LOAD
VAL
CALIB
The processor has a 24-bit system timer, SysTick, that counts down from the reload value to
zero, reloads (wraps to) the value in the LOAD register on the next clock edge, then counts
down on subsequent clocks.
When the processor is halted for debugging the counter does not decrement.
The system timer registers are:
Type
RW
RW
RW
RO
Required
privilege
Privileged
Privileged
Privileged
Privileged
Reset
value
0x00000004
0x00000000
0x00000000
0x0002904
(1)
Description
“SysTick Control and Status Register” on page 192
“SysTick Reload Value Register” on page 193
“SysTick Current Value Register” on page 194
“SysTick Calibration Value Register” on page 195
SAM3N
191