74AVC16245DGG,118 NXP Semiconductors, 74AVC16245DGG,118 Datasheet - Page 2

• Manufacturer Part Number: 74AVC16245DGG,118
• Description: IC TRANSCVR TRI-ST 16BIT 48TSSOP
• Manufacturer: NXP Semiconductors
• Series: 74AVCr

Specifications of 74AVC16245DGG,118

• Logic Type: Transceiver, Non-Inverting
• Package / Case: 48-TSSOP
• Number Of Elements: 2
• Number Of Bits Per Element: 8
• Current - Output High, Low: 12mA, 12mA
• Voltage - Supply: 1.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Logic Family: AVC
• Number Of Channels Per Chip: 16
• Input Level: CMOS
• Output Level: CMOS
• Output Type: 3-State
• High Level Output Current: - 12 mA
• Low Level Output Current: 12 mA
• Propagation Delay Time: 2.8 ns, 1.8 ns
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 1.2 V
• Maximum Operating Temperature: + 85 C
• Function: Bus Transceiver
• Input Bias Current (max): 40 uA
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Polarity: Non-Inverting
• Number Of Circuits: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 935264444118

Philips Semiconductors
FEATURES
1999 Nov 15
handbook, halfpage
Wide supply voltage range from 1.2 to 3.6 V
Complies with JEDEC standard no. 8-1A/5/7
CMOS low power consumption
Input/output tolerant up to 3.6 V
Dynamic Controlled Output (DCO) circuit dynamically
changes output impedance, resulting in noise reduction
without speed degradation
Low inductance multiple power and ground pins for
minimum noise and ground bounce
Power off disables outputs, permitting live insertion.
16-bit transceiver with direction pin; 3-state
(3.6 V tolerant)
Fig.1 Output current as function of output voltage.
(mA)
I OH
100
200
300
0
0
2.5 V
3.3 V
1.8 V
1
2
3
V OH (V)
MNA506
4
2
DESCRIPTION
The 74AVC16245 is a 16-bit transceiver featuring
non-inverting 3-state bus compatible outputs in both send
and receive directions.
The 74AVC16245 features two output enable inputs (nOE)
for easy cascading and two send/receive inputs (nDIR) for
direction control. Input nOE controls the outputs so that the
buses are effectively isolated. This device can be used as
two 8-bit transceivers or one 16-bit transceiver.
This product is designed to have an extremely fast
propagation delay and a minimum amount of power
consumption.
To ensure the high-impedance output state during
power-up or power-down, input nOE should be tied to V
through a pull-up resistor (live insertion).
A DCO circuitry is implemented to support termination line
drive during transient (see Figs 1 and 2).
handbook, halfpage
Fig.2 Output current as function of output voltage.
(mA)
I OL
300
200
100
0
0
1.8 V
1
2.5 V
3.3 V
2
Product specification
74AVC16245
3
V OL (V)
MNA507
4
CC