HFA3861AIN Intersil Corporation, HFA3861AIN Datasheet - Page 11
![no-image](/images/manufacturer_photos/0/3/342/intersil_corporation_sml.jpg)
HFA3861AIN
Manufacturer Part Number
HFA3861AIN
Description
Processor, Direct Sequence Spread Spectrum Base band Processor
Manufacturer
Intersil Corporation
Datasheet
1.HFA3861AIN.pdf
(37 pages)
as received from the control processor. Some dummy bits
will be appended to the end of the packet to insure an
orderly shutdown of the transmitter. This prevents
spectrum splatter. At the end of a packet, the external
controller is expected to de-assert the TX_PE line to shut
the transmitter down.
Scrambler and Data Encoder Description
The modulator has a data scrambler that implements the
scrambling algorithm specified in the IEEE 802.11 standard.
This scrambler is used for the preamble, header, and data in
all modes. The data scrambler is a self synchronizing circuit.
PREAMBLE (SYNC)
128/56 BITS
PREAMBLE
SFD
16 BITS
11
SIGNAL FIELD
8 BITS
FIGURE 8. 802.11 PREAMBLE/HEADER
HFA3861A
SERVICE FIELD
8 BITS
HEADER
It consists of a 7-bit shift register with feedback from
specified taps of the register. Both transmitter and receiver
use the same scrambling algorithm. The scrambler can be
disabled by setting CR32 bit 2 to 1.
NOTE: Be advised that the IEEE 802.11 compliant scrambler in the
HFA3861A has the property that it can lock up (stop scrambling) on
random data followed by repetitive bit patterns. The probability of this
happening is 1/128. The patterns that have been identified are all
zeros, all ones, repeated 10s, repeated 1100s, and repeated
111000s. Any break in the repetitive pattern will restart the
scrambler. To insure that this does not cause any problem, the CCK
waveform uses a ping pong differential coding scheme that breaks
up repetitive 0s patterns.
LENGTH FIELD
16 BITS
CRC16
16 BITS