AT91FR40161 ATMEL Corporation, AT91FR40161 Datasheet - Page 25

• Manufacturer Part Number: AT91FR40161
• Description: The AT91FR40161 Features 136 K Bytes of On-chip SRAM, 2M Bytes of Flash, an External Bus Interface, a 3-channel Timer/Counter, 2 ...
• Manufacturer: ATMEL Corporation

1354D–ATARM–08/02
Byte Select Access is used to connect 16-bit devices in a memory page.
•
•
•
•
Figure 12 shows how to connect a 16-bit device with byte and half-word access (e.g. 16-
bit SRAM) on NCS2.
Figure 12. Connection for a 16-bit Data Bus with Byte and Half-word Access
Figure 13 shows how to connect a 16-bit device without byte access (e.g. Flash) on
NCS2.
Figure 13. Connection for a 16-bit Data Bus without Byte Write Capability.
The signal A0/NLB is used as NLB and enables the lower byte for both read and
write operations.
The signal NWR1/NUB is used as NUB and enables the upper byte for both read
and write operations.
The signal NWR0/NWE is used as NWE and enables writing for byte or half word.
The signal NRD/NOE is used as NOE and enables reading for byte or half word.
EBI
EBI
D8 - D15
A1 - A19
D8 - D15
A1 - A19
D0 - D7
D0 - D7
NCS2
NWE
NCS2
NOE
NUB
NLB
NWE
NOE
NUB
NLB
D0 - D7
D8 - D15
A0 - A18
Write Enable
Output Enable
Memory Enable
D0 - D7
D8 - D15
A0 - A18
Low Byte Enable
High Byte Enable
Write Enable
Output Enable
Memory Enable
AT91X40 Series
25