ADAM24P08 ETC, ADAM24P08 Datasheet - Page 20

• Manufacturer Part Number: ADAM24P08
• Description: Remote Control Transmitter
• Manufacturer: ETC

www.DataSheet.co.kr
3. Instruction
3. INSTRUCTION
3.1. INSTRUCTION FORMAT
*FormatⅠ
*FormatⅡ
*FormatⅢ
*Format Ⅳ
All of the 43 instruction in ADAM24PXX is format in two fields of OP
code and operand which consist of eight bits. The following formats are available
with different types of operands.
All eight bits are for OP code without operand.
Two bits are for operand and six bits for OP code.
Two bits of operand are used for specifying bits of RAM and X-register (bit 1 and
bit 7 are fixed at ″0″)
Four bits are for operand and the others are OP code.
Four bits of operand are used for specifying a constant loaded in RAM or Y-
register, a comparison value of compare command, or page addressing in ROM.
Six bits are for operand and the others are OP code.
Six bits of operand are used for word addressing in the ROM.
Page 19 of 36
ADAM24PXX
Datasheet pdf - http://www.DataSheet4U.net/