ADAM24P08 ETC, ADAM24P08 Datasheet - Page 37

• Manufacturer Part Number: ADAM24P08
• Description: Remote Control Transmitter
• Manufacturer: ETC

www.DataSheet.co.kr
ADAM24PXX
3.4. Guideline for S/W
(1) All rams need to be initialized to any value in reset address for proper design.
(2) Make the output ports `High` after reset.
(3) Do not use WDTR instruction in subroutine.
(4) When you try to read input port changed from external condition, you must secure chattering
(5) To decrease current consumption, make the output port as high in normal routine except
(6) We recommend you do not use all 64 ROM bytes in a page.
(7) `NOP` instruction should be follows STOP instruction for pre-charge time of Data Bus line.
time more than 200uS.
for key scan strobe and STOP mode.
It’s recommend to add `BR $` at first and last address of each page.
Do not add `BR $` at reset address which is first address of `00` page of `0` bank.
ex) STOP : STOP instruction execution
NOP : NOP instruction
Page 36 of 36
3. Instruction
Datasheet pdf - http://www.DataSheet4U.net/