ADAM24P08 ETC, ADAM24P08 Datasheet - Page 25

• Manufacturer Part Number: ADAM24P08
• Description: Remote Control Transmitter
• Manufacturer: ETC

www.DataSheet.co.kr
ADAM24PXX
(6) LYM
(7) LAM
(8) XMA
(9) LYI i
Naming :
Status :
Format :
Function :
<Comment>
Naming :
Status :
Format :
Function :
<Comment>
Naming :
Status :
Format :
Function :
<Comment>
Naming :
Status :
Format :
Operand :
Function :
<Purpose>
<Comment>
Y-register is loaded into the Y-register. Data in the memory is
left unchanged.
Y-register is loaded into the Y-register. Data in the memory is
by another XMA instruction.
Y-register in a particular RAM word address, to specify the
address of a selected output line, to set Y-register for
accumulator for operation and store current data from the
the Y-register.
Load Y-Register form Memory
Set
I
Y ← M(X,Y)
Data from the RAM location addressed by the X-register and
Load Accumulator from Memory
Set
I
A ← M(X,Y)
Data from the RAM location addressed by the X-register and
Exchanged Memory and Accumulator
Set
I
M(X,Y) ↔ A
Data from the memory addressed by X-register and Y-register
accumulator into the RAM. The accumulator can be restored
Load Y-Register from Immediate
Set
Ⅲ
Constant 0 ≤ i ≤ 15
Y ← i
To load a constant in Y-register. It is typically used to specify
specifying a carrier signal outputted from OUT port, and to
Data of four bits from operand of instruction is transferred to
left unchanged.
is exchanged with data from the accumulator. For example,
this instruction is useful to fetch a memory word into the
initialize Y-register for loop control. The accumulator can be
restored by another XMA instruction.
Page 24 of 36
3. Instruction
Datasheet pdf - http://www.DataSheet4U.net/