PIC16C926-I/CL Microchip Technology, PIC16C926-I/CL Datasheet - Page 23

• Manufacturer Part Number: PIC16C926-I/CL
• Description: 64/68-Pin CMOS Microcontrollers with LCD Driver
• Manufacturer: Microchip Technology

2.3.3
The INTCON Register is a readable and writable regis-
ter which contains various enable and flag bits for the
TMR0 register overflow, RB Port change and external
RB0/INT pin interrupts.
REGISTER 2-3:
2001 Microchip Technology Inc.
INTCON REGISTER
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
INTCON REGISTER (ADDRESS 0Bh, 8Bh, 10Bh, 18Bh)
Legend:
R = Readable bit
- n = Value at POR reset
GIE: Global Interrupt Enable bit
1 = Enables all unmasked interrupts
0 = Disables all interrupts
PEIE/GEIL: Peripheral Interrupt Enable bit
1 = Enables all unmasked peripheral interrupts
0 = Disables all peripheral interrupts
TMR0IE: TMR0 Overflow Interrupt Enable bit
1 = Enables the TMR0 overflow interrupt
0 = Disables the TMR0 overflow interrupt
INTE: RB0/INT0 External Interrupt Enable bit
1 = Enables the RB0/INT external interrupt
0 = Disables the RB0/INT external interrupt
RBIE: RB Port Change Interrupt Enable bit
1 = Enables the RB port change interrupt
0 = Disables the RB port change interrupt
TMR0IF: TMR0 Overflow Interrupt Flag bit
1 = TMR0 register has overflowed (must be cleared in software)
0 = TMR0 register did not overflow
INTF: RB0/INT0 External Interrupt Flag bit
1 = The RB0/INT external interrupt occurred (must be cleared in software)
0 = The RB0/INT external interrupt did not occur
RBIF: RB Port Change Interrupt Flag bit
1 = At least one of the RB7:RB4 pins changed state (must be cleared in software)
0 = None of the RB7:RB4 pins have changed state
bit 7
R/W-0
GIE
R/W-0
PEIE
TMR0IE
R/W-0
Preliminary
W = Writable bit
’1’ = Bit is set
R/W-0
INTE
Note:
R/W-0
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
RBIE
Interrupt flag bits are set when an interrupt
condition occurs, regardless of the state of
its corresponding enable bit or the global
enable bit, GIE (INTCON<7>).
PIC16C925/926
TMR0IF
R/W-0
x = Bit is unknown
R/W-0
INTF
DS39544A-page 21
R/W-x
RBIF
bit 0