UPD75P3036 NEC, UPD75P3036 Datasheet - Page 58

• Manufacturer Part Number: UPD75P3036
• Description: 4-BIT SINGLE-CHIP MICROCONTROLLER
• Manufacturer: NEC

*
58
Debugging Tools
In-circuit emulators (IE-75000-R and IE-75001-R) are provided as program debugging tools for the PD75P3036.
Various system configurations using these in-circuit emulators are listed below.
Notes 1. This is a maintenance product.
Remarks 1. Operation of the IE control program is guaranteed only when using the host machine and OS described
Hardware
Software
2. The IE-75300-R-EM is sold separately.
3. Ver. 5.00 or later includes a task swapping function, but this software is not able to use that function.
2. The PD753036 and 75P3036 are commonly referred to as the PD753036 Subseries.
IE-75000-R
IE-75001-R
IE-75300-R-EM
EP-75336GC-R
EP-75336GK-R
IE control program
above.
EV-9200GC-80
EV-9500GK-80
Note 1
Note 2
The IE-75000-R is an in-circuit emulator to be used for hardware and software debugging during
development of application systems using the 75X or 75XL Series products.
For development of the PD75P3036, the IE-75000-R is used with optional emulation board (IE-
75300-R-EM) and emulation probe (EP-753036GC-R or EP-753036GK-R).
Highly efficient debugging can be performed when connected to host machine and PROM
programmer.
The IE-75000-R includes a connected emulation board (IE-75000-R-EM).
The IE-75001-R is an in-circuit emulator to be used for hardware and software debugging during
development of application systems using the 75X or 75XL Series products.
The IE-75001-R is used with optional emulation board (IE-75300-R-EM) and emulation probe
(EP-753036GC-R or EP-753036GK-R).
Highly efficient debugging can be performed when connected to host machine and PROM
programmer.
This is an emulation board for evaluating application systems using the PD75P3036.
It is used in combination with the IE-75000-R or IE-75001-R.
This is an emulation probe for the PD75P3036GC.
When being used, it is connected with the IE-75000-R or IE-75001-R and the IE-75300-R-EM.
It includes an 80-pin conversion socket (EV-9200GC-80) to facilitate connections with target
system.
This is an emulation probe for the PD75P3036GK.
When being used, it is connected with the IE-75000-R or IE-75001-R and the IE-75300-R-EM.
It includes an 80-pin conversion adapter (EV-9500GK-80) to facilitate connections with target
system.
This program can control the IE-75000-R or IE-75001-R on a host machine when connected to
the IE-75000-R or IE-75001-R via an RS-232-C and Centronics interface.
Host machine
PC-9800 Series
IBM PC/AT
or compatible
OS
MS-DOS
Refer to "OS for
IBM PCs"
Ver.3.30 to
Ver.6.2
Note 3
Supply medium
3.5-inch 2HD
5-inch 2HD
3.5-inch 2HC
5-inch 2HC
S5A13IE75X
S5A10IE75X
S7B13IE75X
S7B10IE75X
Part No. (name)
PD75P3036