NL6448AC33-15 NEC, NL6448AC33-15 Datasheet - Page 35

• Manufacturer Part Number: NL6448AC33-15
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

(1) Caution when taking out the module
(2) Caution for handling the module
(3) Caution for the atmosphere
Next figures and sentence are very Important, please understand these contents as foIIows.
<1> Pick the pouch only, in taking out module from a carrier box.
<1> As the electrostatic discharges may break the LCD module, handle the LCD module with care against
<2>
<3> As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for
<4> Do not pull the interface connectors in or out while the LCD module is operating.
<5> Put the module display side down on a flat horizontal plane.
<6> Handle connectors and cables with care.
<7> When the module is operating, do not lose CLK, Hsync, or Vsync slgnal. If any one of these signals is lost,
<8> Obey the supply voltage sequence. If wrong sequence is applied, the module wouldbe damaged.
<9> The torque to nrounting screw should never exceed 0.294 N•m (3 Kgf•cm).
<1> Dew drop atmosphere should be avoided.
electrostatlc discharges.
pressure to the LCD module should be avoided.
cleaning.
the LCD panel would be damaged.
CAUTION
CAUTION
Do not touch an Inverter --on which is stuck a caution label-- while the LCD module is under
the operatlon, because of dangerous high voltage.
This figure is a mark that you wlll get an electric shock when you make a mistake to operate.
This figure is a mark that the LCD module will give out smoke or eatch fire when you make a
mistake to operate.
This figure Is a mark that you will get hurt when you make a mlstake to operate
As the LCD panel and backllght element are made from fragjle glass material, Impulse and
This figure is a mark that you will get hurt and/or the module will have damages
when you make a mistake to operate.
NL6448AC33 - 15
www.DataSheet4U.com
35