NL6448BC33-46D NEC, NL6448BC33-46D Datasheet - Page 27

• Manufacturer Part Number: NL6448BC33-46D
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

www.DataSheet4U.com
6.3.3 Characteristics
6.3.4 Other
The following items are neither defects nor failures.
x Response time, luminance and color may be changed by ambient temperature.
y The LCD may be seemed luminance non-uniformity, flicker, vertical seam or small spot by display
z Optical characteristics (e.g. luminance, display uniformity, etc.) gradually is going to change
{ Do not display the fixed pattern for a long time because it may cause image sticking. Use a screen
| The display color may be changed by viewing angle because of the use of condenser sheet in the
} Optical characteristics may be changed by input signal timings.
~ The interference noise of input signal frequency for this product's signal processing board and
x All GND, backlight inverter ground (GNDB), VCC and backlight inverter power supply voltage
y Do not disassemble a product or adjust volume without permission of NEC Corporation.
z See "REPLACEMENT MANUAL FOR LAMPHOLDER", if customer would like to replace
{ Pay attention not to insert waste materials inside of products, if customer uses screwnails.
(VDDB) terminals should be used without a non-connected line.
patterns.
depending on operating time, and especially low temperature, because the LCD has cold cathode
fluorescent lamps.
saver, if the fixed pattern is displayed on the screen.
backlight unit.
luminance control frequency of customer's backlight inverter may appear on a display. Set up
luminance control frequency of backlight inverter so that the interference noise does not appear.
backlight lamps.
DATA SHEET EN0546EJ5V0DS00
NL6448BC33-46D
27