NL10276AC28-01E NEC, NL10276AC28-01E Datasheet - Page 2

• Manufacturer Part Number: NL10276AC28-01E
• Description: LCD Module
• Manufacturer: NEC

www.DataSheet4U.net
Polarizer hardness
STRUCTURE AND FUNCTIONS
A color TFT (thin film transistor) LCD module is comprised of a TFT liquid crystal panel structure, LSIs for driving the
TFT array, and a backlight assembly. The TFT panel structure is created by sandwiching liquid crystal material in
the narrow gap between a TFT array glass substrate and a color filter glass substrate. After the driver LSIs are
connected to the panel, the backlight assembly is attached to the backside of the panel.
RGB (red, green, blue) data signals from a source system is modulated into a form suitable for active matrix addressing
by the onboard signal processor and sent to the driver LSIs which in turn addresses the individual TFT cells.
Acting as an electro-optical switch, each TFT cell regulates light transmission from the backlight assembly when
activated by the data source. By regulating the amount of light passing through the array of red, green, and blue dots,
color images are created with clarity.
OUTLINE OF CHARACTERISTICS (at room temperature)
Display area
Drive system
Display colors
Number of pixels
Pixel arrangement
Pixel pitch
Module size
Weight
Contrast ratio
Viewing angle (more than the contrast ratio of 10:1)
Designed viewing direction
Color gamut
Response time
Luminance
Signal system
Supply voltage
Backlight
Power consumption
2
2H (min. with JIS K5400)
285.696 (H) ´ 214.272 (V) mm
a-Si TFT active matrix
Full-color
1024 ´ 768
RGB vertical stripe
0.279 (H) ´ 0.279 (V) mm
330.0 (H) ´ 255.0 (V) ´ 19.0 typ. (D) mm
1220 g (typ.)
150:1 (typ.)
• Horizontal : 50° (typ., left side, right side)
• Vertical
• Wider viewing angle with contrast ratio
• Wider viewing angle without image reversal : up side (12 o'clock)
• Optimum grayscale ( g = 2.2)
40 % (typ.. At center, To NTSC)
25 ms (max.), “white” to “black”
200 cd/m
Analog RGB signals, Synchronous signals (Hsync, Vsync), Dot clock (CLK)
12 V, 12 V (Logic/LCD driving, Backlight)
Edge light type: Two cold cathode fluorescent lamps with inverter
15 W (typ. )
[Replacement parts]
•
•
Lamp holder: 141LHS08
Inverter: 141PW111
2
(typ.)
: 20° (typ., up side), 35° (typ., down side)
: down side (6 o'clock)
: 0° (typ.)
NL10276AC28-01E
www.DataSheet4U.net