NL10276BC24_19D NEC, NL10276BC24_19D Datasheet - Page 11

• Manufacturer Part Number: NL10276BC24_19D
• Description: Display Module
• Manufacturer: NEC

www.DataSheet.co.kr
4.4 POWER SUPPLY VOLTAGE SEQUENCE
Note1: In terms of voltage variation (voltage drop) while VCC rising edge is below 3.0V, a
Note2: Display signals (D0+/-, D1+/-, D2+/- and CLK+/-) and function signal (DPS) must be Low
Note3: The backlight should be turned on within the valid period of display and function signals, in
Display signals*
Function signal
protection circuit may work, and then this product may not work.
or High-impedance, exclude the VALID period (See above sequence diagram), in order to
avoid that internal circuits is damaged.
If some of display and function signals of this product are cut while this product is working,
even if the signal input to it once again, it might not work normally. If customer stops the
display and function signals, they should be cut VCC.
order to avoid unstable data display.
VCC
Note1
Note2
* These signals should be measured at the terminal of 100Ω resistance.
0V
PRELIMINARY DATA SHEET DOD-PP-0322 (1st edition)
0ms < t < 35ms
0V
3.0V
ON
10μs≤ Tr < 50ms
VALID period
NL10276BC24-19D
OFF
0ms < t < 35ms
Toff ≥ 50ms
0.3V
ON
11 11
Datasheet pdf - http://www.DataSheet4U.net/